Hi Rich,
I didn't remove the tubes, but I did remove the anode connection to both of
them for the quick HV test. The fuses don't blow when the anodes aren't
connected.
I figured the sound wasn't inside the tube for the reason you mention. Any
idea what could be causing the loud pop? The first time I heard it, I
figured it was the spark gap on the T/R relay, but after thinking about it
that doesn't make sense since I wasn't transmitting and the amp was in
standby.
73,
Clay
>
> Hello, Clay -- An internal tube short makes very little sound. A loud
> pop is in the atmosphere, not a vacuum
>
>
> Does the 922 blow fuses with the tubes removed?
> >
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|