Re: [Amps] GS35B Plate connection suggestions wanted

[gdaught6@stanford.edu]

Hi,

> The one time I did it...used a stainless hose clamp around the base of
> the copper fins and pinched a wire under it.

This is probably a BAD way to do it, because the anode cooler will 
expand considerably going up to 250 degrees C!  The hose clamp could 
result in some pretty big stresses in the tube.  

Rich Measures' (AG6K) website has a neat way to contact anode coolers 
that don't have caps for the purpose... or even those that do!

73,

George T. Daughters, K6GT



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps