Dear Guillermo,
As this spot in the 813 is especially warm it might be a good
idea to use high-temperature (Red) RTV Silicone.
Barring that availability, Refractory cement or dental plaster
will work well.
Hal Mandel
W4HBM
On Thu, 17 Feb 2005 19:53:13 -0300 GGLL <nagato@arnet.com.ar> writes:
> Which cement could be appropriate to fix the loose top cap in
> one of my
> 813's?. It works very well, the cap has been detached from the
> glass, but
> still in place by means of the plate connection wire.
>
> TIA
> Best regards
> Guillermo - LU8EYW.
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|