RTV (silicone Cement) works very well. It bonds to glass and metal
well and is
very resistant to temperature. Try it sometime. Take a cured glob of
Silicone Cement and
put your soldering iron against it and see what happens. Practically nothing.
The point of contact may change color a little bit but that is all. It is
also flexible and
will not produce strain on the glass envelope.
73
Bill wa4lav
At 07:53 PM 2/17/2005 -0300, GGLL wrote:
> Which cement could be appropriate to fix the loose top cap in one
> of my
>813's?. It works very well, the cap has been detached from the glass, but
>still in place by means of the plate connection wire.
>
>TIA
>Best regards
>Guillermo - LU8EYW.
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|