Did you try it on a good dummy load?
73
Gary K4FMX
Eg9k@aol.com wrote:
> Hi again - I have received 6 reply's as to the my problem of the Tune dial
> knob pointer pointing at the center of the 20 meter portion of the tuning
> knob
> scale on the front panel when tuned up on 40 & 75 meters. Three of the
> replies
> stated that their SB 200'S tuned up the same way and the other three replies
> said their knob pointer was in the correct area for 75 and 40 meters when
> tuned
> up on those two bands. As I've stated previously, I've checked out about
> everthing I can think of. I would very much apperciate hearing from any SB
> 200
> owners as to where their amp tune pointer point to when their amp is tuned up
> on
> 40 & 75 meters. It still appears to me that I've picked up some additional
> capacity somehow and it's causing my plate tune capacitor to require less
> capacity (20 mtr. position) to tune 75 & 40 meters. 10, 15 and 20 meters work
> perfectly. Thanks Much for reading. Harold - K9ge
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|