On Feb 26, 2005, at 9:12 AM, Dick Green wrote:
> That's very close to the most ridiculous thing I've heard on this
> reflector
> -- and there have been a lot of ridiculous things said on this
> reflector!
Apparently, Dick Erhorn had some difficulty shielding the CPU from RF.
>
> ...
>
> Next thing you're going to tell us is that the CPUs form little gold
> balls
> across the semiconductor junctions when there's a lot of RF around!
chortle.
>
> ...
> 73, Dick WC1M
>
>> -----Original Message-----
>> From: R.Measures [mailto:r@somis.org]
>> Sent: Saturday, February 26, 2005 11:17 AM
>> To: TNeill1648@aol.com
>> Cc: amps@contesting.com
>> Subject: Re: [Amps] Alpha 87A Fault 99
>>
>>
>> In my opinion, it is probably not a wonderful idea to use a CPU where
>> there is a large amount of RF.
>>
>> On Feb 26, 2005, at 7:35 AM, TNeill1648@aol.com wrote:
>>
>>
>>> Can anyone tell me how to reset the Alpha 87A from fault 99? I am
>>> using
>>> Hyper Terminal to display the soft and hard reset information.
>>>
>>> Thank you.
>>>
>>> Tom
>>> _______________________________________________
>>> Amps mailing list
>>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>>
>>>
>>
>> Richard L. Measures, AG6K, 805.386.3734. www.somis.org
>>
>>
>>
>
>
>
Richard L. Measures, AG6K, 805.386.3734. www.somis.org
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|