To: | philk5pc@tyler.net, TexasRF@aol.com, wd7s@earthlink.net,amps@contesting.com |
---|---|
Subject: | Re: [Amps] Alpha 77Dx -Adding Grounded Grid Filament Choke |
From: | G3rzp@aol.com |
Date: | Sat, 5 Mar 2005 16:37:26 EST |
List-post: | <mailto:amps@contesting.com> |
In a message dated 05/03/2005 20:19:25 GMT Standard Time, philk5pc@tyler.net writes: from 90 to 800 volts break-down. Note that the breakdown voltage at something like a 100 or 200 volts/microsecond rise time can be as high as 1kV for a 90v beakdown gap - according to the data sheet. Work I did 35 years ago on rx front end protection found that quite accurate. 73 Peter G3RZP _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [Amps] Water cooled amp question, G3rzp |
---|---|
Next by Date: | Re: [Amps] Water cooled amp question, Joe Subich, K4IK |
Previous by Thread: | Re: [Amps] Alpha 77Dx -Adding Grounded Grid Filament Choke, TexasRF |
Next by Thread: | Re: [Amps] Alpha 77Dx -Adding Grounded Grid Filament Choke, TexasRF |
Indexes: | [Date] [Thread] [Top] [All Lists] |