Amps
[Top] [All Lists]

Re: [Amps] nylons

To: RICHARD GEORGE <k6kwq@msn.com>
Subject: Re: [Amps] nylons
From: John Irwin <crazytvjohn@yahoo.com>
Date: Mon, 14 Mar 2005 16:24:00 -0800 (PST)
List-post: <mailto:amps@contesting.com>
I put a 1/2 long sample 3/8" dia in with 1 tablespoon water separated ,for 2 
minutes, no  noticeable heating.  Then by itself for 1 minute ,slightly just 
noticeable warm to the taste buds,  
 
john kb9tc

RICHARD GEORGE <k6kwq@msn.com> wrote:
Put some in your microwave oven and see what happens.
 
 
 
 
K6KWQ Dick "12 Volt radios are for wimps, real radios can kill you" Still can't 
make it go QRO with "More Power"
----- Original Message ----- 
From: John Irwin 
To: amps@contesting.com 
Sent: Monday, March 14, 2005 3:54 PM
Subject: [Amps] nylons


dudes
 
a large ace hardware store opened here last week , One block away.  I have 
noticed a lot of nylon items that look a lot like the ceramic standoff 
insulators, they come with a hole in the center,and some are taped for 6-32  or 
other simular sizes.  lenght every 1/8 inch or so,diameter 1/4 to 1/2 inch
 
How does nylon act in rf?    Like in a amplifier as used to support variable 
capacitors or inductors? Next to the plate choke.
 
Anyone put some in the pi coil and see if it holds up. or does it go up in 
smoke?
 
thanks
john kb9tc
 
 


---------------------------------
Do you Yahoo!?
 Yahoo! Small Business - Try our new resources site! 
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps



                
---------------------------------
Do you Yahoo!?
 Yahoo! Mail - now with 250MB free storage. Learn more.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>