I can only support Steve in this, although all I have tested have been
within 0.1V of each other (from three different batches)
Vy 73 de OZ1PIF, Peter
********** OZ1PIF **************
email: oz1pif(no-spam-filler)@privat.dk
http://home24.inet.tele.dk/oz1pif/
Ph. +45 4619 3239
Snailmail:
Peter Frenning
Ternevej 23
DK-4130 Viby Sj.
Denmark
***********************************
----- Original Message -----
From: "Steve Thompson" <g8gsq@ic24.net>
To: <amps@contesting.com>
Sent: Friday, April 08, 2005 11:29 AM
Subject: Re: [Amps] Re.: 500w Amplifier With IRF510's - Schematic updated
> On Friday 08 April 2005 06:23, Peter Frenning [OZ1PIF] wrote:
>> Some errors in the schematic corrected..
>>
>> > With PCB-design, Schematic and pictures plus some commentary:
>> > http://home24.inet.tele.dk/oz1pif/50MHz_IRF510.htm
> A suggestion for anyone planning to copy this - get 8 fets from one batch,
> so
> the gate thresholds are likely to be close together. IR specify a range of
> 2-4V so a mix could end up with only some being biassed, and the others
> being
> non-linear. After a blowup, replace the whole lot to avoid mixing batches
> (hardly expensive!).
>
> Steve
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> --
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.308 / Virus Database: 266.9.4 - Release Date: 06-04-2005
>
>
--
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.9.4 - Release Date: 06-04-2005
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|