[Top] [All Lists]

Re: [Amps] Roller Inductor Drive Chains

To: Bob Maser <>
Subject: Re: [Amps] Roller Inductor Drive Chains
From: "Kenneth D. Grimm, K4XL" <>
Date: Sat, 11 Jun 2005 15:09:39 -0400
List-post: <>
Bob Maser wrote:

>I am doing some more mods on my 3X3 amp and need to find a source for chain 
>or bead drive components.  My 20V-2 has some really nice stuff but I don't 
>want to cannibalize it, at least at this point.  I want to bring a shaft 
>through the front intermediate wall of my RF deck and reposition the turns 
>counter in a place on the front outer panel where it will look more 
>aesthetically pleasing.
>Any leads would be appreciated.
>Bob W6TR 
I would first have a look at  Small Parts under roller chains and 
sprockets at the following link.
There are probably some others that I'm not aware of.  Perhaps others 
will chime in with their favorite sources for these parts.


Ken K4XL

*** BoatAnchor Manual Archive ***
On the web at and
FTP site info: login: anonymous p/w: youremailadr

Amps mailing list

<Prev in Thread] Current Thread [Next in Thread>