| To: | AMPS@CONTESTING.COM |
|---|---|
| Subject: | Re: [Amps] 5.0V FILAMENT IS ONLY 2.5V |
| From: | JAMES SMITH <kg6nlb@yahoo.com> |
| Date: | Wed, 6 Jul 2005 15:14:43 -0700 (PDT) |
| List-post: | <mailto:amps@contesting.com> |
I have an amplifier that runs 2 x 3-500z's and the filament voltage is 2.5
volts when it should be
5.0v.The amp is currently wired to 110VAC and I would like to wire it to
220VAC. Which will cure the problem, or should. Anyone have any suggestions on
how to wire it up? any suggestions would be great.
---------------------------------
Sell on Yahoo! Auctions - No fees. Bid on great items.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [Amps] More on Agilent Sig Gens, John T. M. Lyles |
|---|---|
| Next by Date: | Re: [Amps] 5.0V FILAMENT IS ONLY 2.5V, Vic Rosenthal |
| Previous by Thread: | [Amps] FS: B&W Airdux coil stock, JerryVan |
| Next by Thread: | Re: [Amps] 5.0V FILAMENT IS ONLY 2.5V, Vic Rosenthal |
| Indexes: | [Date] [Thread] [Top] [All Lists] |