| To: | W0UN -- John Brosnahan <shr@swtexas.net>, amps@contesting.com |
|---|---|
| Subject: | Re: [Amps] Bend allowance |
| From: | Peter Chadwick <g3rzp@g3rzp.wanadoo.co.uk> |
| Reply-to: | g3rzp@g3rzp.wanadoo.co.uk |
| Date: | Thu, 4 Aug 2005 17:39:31 +0200 (CEST) |
| List-post: | <mailto:amps@contesting.com> |
W0UN commented on aluminium characteristics changing with age. Very true. Generally, I find a bit of the heat treatment works anyway. 73 Peter GW3RZP/P _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [Amps] Amps Digest, Vol 32, Issue 12: Metric system, w5grg |
|---|---|
| Next by Date: | Re: [Amps] Amps Digest, Vol 32, Issue 12: Metric system, Peter Chadwick |
| Previous by Thread: | Re: [Amps] Bend allowance, W0UN -- John Brosnahan |
| Next by Thread: | [Amps] locating input circuits in a TL922, Oliver Bock |
| Indexes: | [Date] [Thread] [Top] [All Lists] |