Don Lemley wrote:
>Hi all,
>
> Ok, I know this has been covered here before, but is there a
>consensus on how to get the moisture out of HV plate transformers and
>chokes, so they won't arc on me......
>
Self heating? An untried idea - short one of the windings, and apply a
little voltage to the other with a variac and let the thing warm up
gradually, increasing the voltage until it sits at 50C/120F for a few
days. My guess would be to short the primary and apply volts to the
secondary.
Steve
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|