Gang
I am having trouble with the 12/10 meter mod for Yaesu VL-1000 Quadra. For
those who have made this mod (and it is supposed to be easy!) I have a few
questions:
1) Is the J1015 connecter the one in the lower left hand corner on the bottom?
2) Is pin #7 (to be shorted to ground) the one 7 positions in from the LEFT of
the connector?
3) I used the upper right mounting post for the circuit board as the ground. Is
this OK?
The unit ignores the ground and pressing F SET, TUNER and DISPLAY 2 when
turning on - it boots normally?
THis is getting me down. Anyone have any ideas
Thanks
Rich, AA2BY
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|