Amps
[Top] [All Lists]

Re: [Amps] Low power output from 4-400A linear

To: "Bruce Lanning" <blanning@acadia.net>, <amps@contesting.com>
Subject: Re: [Amps] Low power output from 4-400A linear
From: Scott Townley <nx7u@arrl.net>
Date: Tue, 11 Oct 2005 18:40:49 -0700
List-post: <mailto:amps@contesting.com>
another thought...is there a tuned input/cathode circuit, or is it direct-feed?


At 07:27 2005-10-11, Bruce Lanning wrote:
>Several years ago, I built a GG amplifier using a pair of 4-400A. The grid
>and screen are grounded at the tube socket.
>
>I feel that the power out is quite low. Below are some of the operating
>parameters:
>  Measured power out: 855 watts
>  Power input: 1216 Watts
>  Ep:3200 Volts
>  Ip: 380 Ma.( at max output)
>  Ig: 250 Ma.
>  Eg: Bias 00
>  Static Ip: 120 Ma.
>
>I am using the B&W Pi-network, model 850A output tuning inductor
>.
>I have checked the tube filament pins for a poor solder joint.
>They both looked OK, but I resoldered them to no avail.
>
>Maybe someone out there could throw some light on my problem, or if I even
>have a problem...
>
>
>
>
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>