In a message dated 11/16/2005 8:22:59 AM Eastern Standard Time,
jim@audiosystemsgroup.com writes:
Neutral is intended to carry current (although it is not used in the
240 volt circuits in homes). Ground is a PROTECTIVE conductor that
should NOT carry current except in the case of a fault. (A fault is a
failure of some component or wiring that results in an equipment
enclosure being hot).
The function of the safety ground is to provide a path for fault
current that blows the breaker and protects the user from shock (and
fire). Electrical codes require that the safety ground (from the
breaker panel) be connected to the equipment enclosure (via the green
wire).
This is absolutely TRUE! and its the gospel!
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|