Amps
[Top] [All Lists]

Re: [Amps] 220V wiring: Was Question about safety ground connection

To: <Gudguyham@aol.com>, <r@somis.org>
Subject: Re: [Amps] 220V wiring: Was Question about safety ground connection
From: "N7HIY" <N7HIY@comcast.net>
Date: Sat, 19 Nov 2005 10:45:11 -0800
List-post: <mailto:amps@contesting.com>
Rich was telling a satirical joke

know how to tell if a house that has burned down belongs to a ham
see bottom

----- Original Message ----- 
From: <Gudguyham@aol.com>
To: <r@somis.org>
Cc: <johna8119-amps@yahoo.com>; <amps@contesting.com>
Sent: Saturday, November 19, 2005 9:34 AM
Subject: Re: [Amps] 220V wiring: Was Question about safety ground connection


>
> In a message dated 11/19/2005 10:50:59 AM Eastern Standard Time, 
> r@somis.org
> writes:
>
> As I  understand it, arc-fault circuit breakers detect the RF energy
> from the  arc and switch off the circuit.  For amateur radio operators,
> this  "improvement" should be even more interesting than GFI breakers.
>>  __________________________________
>
>
> No, they dont work that way.  Here is
> how_http://www.cpsc.gov/cpscpub/pubs/afcifac8.pdf_ 
> (http://www.cpsc.gov/cpscpub/pubs/afcifac8.pdf)
> _______________________________________________

only things saved are ham shack gear, stacked in front yard
ham is in car talking on mobile, wife no where to be found

Cliff N7HIY 



---
avast! Antivirus: Outbound message clean.
Virus Database (VPS): 0546-4, 11/18/2005
Tested on: 11/19/2005 10:45:11 AM
avast! - copyright (c) 2000-2004 ALWIL Software.
http://www.avast.com



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>