Amps
[Top] [All Lists]

Re: [Amps] Does Santa Claus have a junkbox?

To: <wc6w@juno.com>, <Amps@contesting.com>
Subject: Re: [Amps] Does Santa Claus have a junkbox?
From: "Peter Voelpel" <df3kv@t-online.de>
Date: Sat, 24 Dec 2005 01:14:23 +0100
List-post: <mailto:amps@contesting.com>
Marv,

You are a lucky man with only such few parts missing.
I am also busy with 5 or 6 amp projects and a lot more is missing,
by the way also the Comet CV03C-1000 and the small fixed version around
300pf
by Comet or Jennings ;-) 
I could help you out with the 1000pf air variable, its a 970pf continous
rotation
with 0.8-1mm plate spacing, will measure the phyical size tomorrow

Happy holidays to everbody

73
Peter


-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of wc6w@juno.com
Sent: Freitag, 23. Dezember 2005 23:49
To: Amps@contesting.com
Subject: [Amps] Does Santa Claus have a junkbox?

  I was reviewing the missing pieces lists for some 5 amplifier projects
here and it looks like I'm only short one or two parts to complete each.
This happenstance must be a corollary of Murphy's law!  :-)

  If you happen to know Santa's email, please forward the following list:


 Centralab 2500 series, type PISD (10 position progressive shorting) or UD
(11 position) ceramic switch wafers.  (1-5/8" x 1-7/8" diameter).  Need 2
pieces.

 Comet CV03C-1000 or CV03C-1400,  1000pF or 1400pF vacuum variable
capacitors;  Several shaft options (trailing letter) are acceptable.  Comet
recently changed the numbers on these but, I don't think that the new ones
(with reallllly confusing designations!) would be present yet on the
secondary market.  Jennings CMV1-1000 with a 1/4" shaft also a possiblity.
I can also make do with their old spline drive version if the pricing is
commensurate. Need 2 (guaranteed) working (good vacuum & alignment) parts.
 
 Comet CV01C-250G-10KV,  250pF 10KV vacuum variable capacitor. Need one
(guaranteed) working (good vacuum & alignment) part

 Comet MC1C-250 or 300pF, 15KV fixed vacuum capacitors.  Need two
(guaranteed) working (good vacuum & alignment) parts.

 Jennings Y1 (or CY-1), 1pF fixed, vacuum caps; prefer glass over ceramic,
they're cuter!  Seeking three parts.

 A 1000pF or greater, physically small air variable -- 2.5" hi max.
including plate travel.  Prefer continuous rotation.  A General Radio 1421-K
would be fine!  :-)


73 & Happy Holidays!
  Marv WC6W










*


___________________________________________________________________
Try Juno Platinum for Free! Then, only $9.95/month!
Unlimited Internet Access with 250MB of Email Storage.
Visit http://www.juno.com/value to sign up today!

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>