Mike wrote:
>Hello,
>
>Is it okay to use the GS-35B in an upside down, vertical
>position? Want to make final adjustments to the input pi network
>while the tube is operating. Unfortunately, the tube's grid
>compartment is not easy to get to when the tube is in the operating position.
>
>Also, understand the typical impedance for a single GS-35B is 30 Ohms
>which comes close to what I expect based on the anticipated operating
>values of: Eg=30V, Ip=0.8A & Ig=0.2A. However, input impedance
>values from 100 Ohms to 25 Ohms have been found in the
>archives. Anyone have a smaller range of possibilities found from
>experience?
>
> 73,
> Mike, K4GMH
>
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>
>
>
>
>
But don't forget to reverse the normal USB/LSB, per band.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|