I would suggest the 2C647 because of its lower RPM (quieter) and with
the slightly higher air flow, should do nicely. It costs slightly less
too. I agree with Jim, Grainger is less cost. You'll have to create an
account there... use your call as your company name, create a login and
order it.
73, Tony W4ZT
Jim Kearman wrote:
> From: Mike Bondarev <mikebond@tochka.ru>
>> I would like to buy Dayton 4C763
>> 98CFM blower. I have just one source:
>> http://www.electricmotorwarehouse.com/dayton_blower.htm
>> Anyone can tell me, if this blower will not make to much noises and maybe
>> there are some other sources for good blowers?
>
> Their price is $61.14. Grainger.com has the same blower for $49.30.
>
> http://www.grainger.com/Grainger/wwg/productIndex.shtml
>
> and search for the part #.
>
> Note that at 0.500" static pressure this blower makes 54 cfm. Someone will
> probably know if that's enough air for those tubes.
>
> 73,
>
> Jim, KR1S
> http://kr1s.kearman.com/
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|