On Jan 30, 2006, at 5:23 PM, Dudley Hurry wrote:
> Mike,
>
> Don't forget about EMB blowers.. They are German made and very quiet
> for
> the CFM/backpressure created.. They have one, model G2E 108-AA01-32
> that
> can develop 91 cfm @54 dBA noise and weights 48 ozs..
How much pressure?
>
> http://www.ebmpapst.us/
>
> Good luck,
> Dudley
> WA5QPZ
>
>
>
> At 11:32 AM 1/28/2006 +0000, Mike Bondarev wrote:
>> Hi again!
>> Thanks to all of you for your comments. GU-84B need 147CFM and GU-78B
>> need 165CFM airflow. But this is for full power plate dissipation
>> continuous key down. In SSB and CW you can have less. So I'll look
>> for Dayton 2C647, 4C006 and 4C446. I hope the quality of this blowers
>> is good for long time operations.
>>
>> Regards, Mike RL3BM
>> ex. UA6LU
>>
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
Richard L. Measures, AG6K, 805.386.3734. www.somis.org
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|