Amps
[Top] [All Lists]

Re: [Amps] Amp faceplates

To: amps@contesting.com
Subject: Re: [Amps] Amp faceplates
From: "John- W4DJ" <w4dj@hotmail.com>
Date: Sat, 18 Mar 2006 11:23:55 -0500
List-post: <mailto:amps@contesting.com>
Hi Guys
All the lettering I've ever seen on Electronics has been Silk Screen 
Lettering.
I don't think the stick-on type would hold up.

73s de John W4DJ


>From: "Will Matney" <craxd1@verizon.net>
>Reply-To: craxd1@verizon.net
>To: amps@contesting.com
>Subject: Re: [Amps] Amp faceplates
>Date: Sat, 18 Mar 2006 11:14:35 -0500
>
>Pete,
>
>I'd have hardly any overhead in these the way it stands. The only thing 
>would take some time is the CAD layout for the whole 8-1/2 x 11 label 
>sheet(s). The Damark sheets are about 1/2 that size and generally have two 
>in a pack. With this, I can get it out as one sheet or two doubling the 
>amount of labels for use. The only problem would be white text as this is 
>not set up to do that. Any color but white. To start though, black labels 
>would be all I'd offer like Damark unless color would be asked for a lot. 
>The sell price would be about $5.00 per 8-1/2 x 11 sheet. That's a little 
>less than Damark.
>
>I can get the materials to make rub ons, and decals but they dont hold up 
>as good. Plus, you have to coat them with a clear poly after they're 
>applied same as Damark.
>
>Best,
>
>Will
>
>*********** REPLY SEPARATOR  ***********
>
>On 3/18/06 at 10:14 AM Pete Smith wrote:
>
> >My guess is that you won't get a large-enough market to make back your
> >set-up costs.  I use a CASIO labelmaker with white on clear tape, which 
>is
> >quite permanent and does all but the sophisticated stuff, like dial
> >markings.
> >
> >73, Pete N4ZR
> >
> >At 05:15 PM 3/17/2006, you wrote:
> >>All,
> >>
> >>Would there be a good market in clear press-on labels that have both
> >switch text, and dial markings to fit amps or other amateur equipment?
> >These would be permanent labels, and not the rub-on type like Damark.
> >These would have a paper back that you peel off and place the plastic 
>film
> >lable on like a sticker. They would be clear to show through the paint
> >behind. These could be done in any color other than white text-markings.
> >I'm thinking about awful seriously having these if they will sell. Any
> >thoughts are welcome.
> >>
> >>Best,
> >>
> >>Will
> >>
> >>_______________________________________________
> >>Amps mailing list
> >>Amps@contesting.com
> >>http://lists.contesting.com/mailman/listinfo/amps
>
>
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps

_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's FREE! 
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>