Amps
[Top] [All Lists]

Re: [Amps] Tuned input board on SB-220

To: Ed Dial <diale@mindspring.com>
Subject: Re: [Amps] Tuned input board on SB-220
From: Dino Darling <dino@k6rix.com>
Date: Wed, 22 Mar 2006 19:19:11 -0800
List-post: <mailto:amps@contesting.com>
I'll be watching this thread with interest!  I've got a 221 that I 
would like to convert to a 220!

At 06:39 PM 03/22/2006, Ed Dial wrote:


>Gentlemen,
>
>I need opinions from the experts that live here. I have an SB-220
>that does an excellent job on the pre-WARC bands, however it doesn't
>like 12 and 17 meters very well, thanks to the tuned input circuit
>from what I understand. I noticed that the good folks at LDG
>Electronics is now selling a stripped version of their AT-100
>autotuner as the AT-100AMP, marketed as an RF amplifier tuned input
>board for homebrews and the like. My question is, could this board be
>fitted into the SB-220 without much pain? Would this solve the WARC problem?
>
>If so, would it work in the SB-200 as well? I have no clue with 572s.
>
>Lazy and looking for the simple way out -
>
>Ed
>WA4RYW
>
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
>
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Anti-Virus.
>Version: 7.1.385 / Virus Database: 268.2.6/288 - Release Date: 03/22/2006

Dino - K6RIX
dino@k6rix.com 


-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.1.385 / Virus Database: 268.2.6/288 - Release Date: 03/22/2006


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>