On Apr 2, 2006, at 1:18 AM, Steve Thompson wrote:
>
>
> Dan Hearn wrote:
>> I am trying to identify the resistor value and type used in the TL922A
>> parasitic suppressors. I believe it is a 2W ohmite carbon but not
>> sure and
>> don't know the value. The schematic in the instruction manual does
>> not give
>> the value. I am aware of the problems of using carbon resistors in
>> this
>> application and the use of resistance wire suppressors with metal film
>> resistors.
> The one I have appears to be 2x47R in parallel.
What is the measured R on yours, Steve?
>
> Steve
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
Rich Measures, 805.386.3734, AG6K, www.somis.org
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|