All,
To any who are interested and does their own blue line prints at their home or
office, I ran across this GAF E size blueline machine on ebay. It's located in
Castle Rock, CO. and is a pick-up only item. The lady will not ship this. This
also has the vacuum system for the amonia fumes. I have a smaller one by
another manufacturer without the vacuum, and believe me, the vacuum is a
blessing. This will do bluelines or blacklines (if they're the ammonia type of
paper) from A size to E size. She's going to throw in some ammonia, and what
ever else she finds to go with it. That's good as it means it has the gallon
jug adapter and hoses. These are realy easy to use. You have to purchase the
ammonia from a blueprint supply (store ammonia isn't strong enough), and the
paper is all that's required. A gallon of ammonia lasts for a long time too.
This one, you vent the vacuum outside so no ammonia fumes will be in your house
or office. To develop a print, you place your drawing (vellum)
on top of the paper and feed both sheets together into the machine. In the
end, the two sheets are seperated and the print made. It's that simple. This
can be used with the blackline paper (remember, it has to be the ammonia type)
to make amplifier face plates if your doing more than one, or any other
faceplate for that matter. Take the print and apply a clear plastic overlay and
you have it. If it wasn't pick up only, I'd sure bid on it as right now it's
opening bid is a whole $0.99 cents! This is the same size used in most
engineering offices I've worked at. To any around Castle Rock, good luck as I
wish I could buy it.
Link;
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7618049464&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1
Best,
Will
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|