Amps
[Top] [All Lists]

Re: [Amps] teeny copper strap

To: Pete Smith <n4zr@contesting.com>
Subject: Re: [Amps] teeny copper strap
From: Vic K2VCO <vic@rakefet.com>
Date: Wed, 07 Jun 2006 08:31:27 -0700
List-post: <mailto:amps@contesting.com>
Pete Smith wrote:
> Before I mail order some copper flashing or go to one of the
> lightning protection outfits for far more than I'll need, is there
> any non-radio source of appropriate stuff for grounding my SB-220
> grids?  I think that stained glass makers use copper foil strips, but
> assume that is probably too thin for what I need.

I bought some small quantities of copper (they also have brass) sheet at 
a hobby shop.  I use this a lot for model train projects!  They have 
different thicknesses.  I would suggest using some that's thicker than 
foil and thinner than flashing.
-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>