Tom,
The 2400 series has 4 over 4 but there is a round key pin also under the flat
pins 5 and 6. If this is the one, the number is a 2408. Plug is P-2408-LAB and
socket is S-2408-LAB. This from the Cinch catalog.
Best,
Will
*********** REPLY SEPARATOR ***********
On 6/27/06 at 2:23 AM Tom Sessions wrote:
>Will,
>
>Thanks for your reply. I will check the parts houses and ebay as you
>suggest.
>
>The connector need has 8 horizontal pins, 4 over 4.
>
>73
>Tom K4RV
>
>----- Original Message -----
>From: "Will Matney" <craxd1@verizon.net>
>To: "Tom Sessions" <radio_k4rv@peoplepc.com>; <amps@contesting.com>
>Sent: Tuesday, June 27, 2006 01:53
>Subject: Re[2]: [Amps] L-4B connector
>
>
>Tom,
>
>Yes, those are Cinch Jones and are available from Mouser and Allied
>Electronics. They have different styles according to how the pins are
>turned
>so they'll only plug together a certain way. I'd look for Cinch or Cinch
>Jones at ebay first as it will most likely be the cheapest. These are
>still
>being made and are the 300 series of connectors. The one with 8 pins is a
>308. It has 4 horizontal and 4 vertical pins.
>
>Best,
>
>Will
>
>*********** REPLY SEPARATOR ***********
>
>On 6/27/06 at 1:25 AM Tom Sessions wrote:
>
>>Will,
>>
>>Thanks for your reply. I will search ebay.
>>
>>Mine is the square type with FLAT terminals.
>>
>>Tom K4RV
>>
>>
>>
>>----- Original Message -----
>>From: "Will Matney" <craxd1@verizon.net>
>>To: "Tom Sessions" <radio_k4rv@peoplepc.com>; <amps@contesting.com>
>>Sent: Tuesday, June 27, 2006 00:55
>>Subject: Re: [Amps] L-4B connector
>>
>>
>>Tom,
>>
>>I've seen both the 8 and 11 pins on ebay with ready made cords out of
>>rotor
>>cable which most used. I think they're wired for Heathkit stuff though,
>>but
>>the guy has single connectors also. I can't remember who made these as you
>>can't hardly find them now. The square types with the flat terminlas are
>>made by Cinch and available everywhere. If I recall, your's is the round
>>type?
>>
>>Best,
>>
>>Will
>>
>>*********** REPLY SEPARATOR ***********
>>
>>On 6/27/06 at 12:25 AM Tom Sessions wrote:
>>
>>>I need a connector for my L-4B power supply, the one for the end of the
>>>cord
>>>that plugs onto the back of the L-4B. It has eight terminals.
>>>
>>>(1) Anybody got a spare for sale?
>>>
>>>(2) Where can one be obtained?
>>>
>>>Thanks/73
>>>Tom K4RV
>>>
>>>_______________________________________________
>>>Amps mailing list
>>>Amps@contesting.com
>>>http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|