Amps
[Top] [All Lists]

Re: [Amps] Mica cap substitute \ alternative

To: "'Harold Mandel'" <ka1xo@juno.com>, <amps@contesting.com>
Subject: Re: [Amps] Mica cap substitute \ alternative
From: "Joe Subich, W4TV" <w4tv@subich.com>
Date: Wed, 12 Jul 2006 18:03:42 -0400
List-post: <mailto:amps@contesting.com>
Be careful of Steatite ... several kinds will absorb moisture 
and cause problems.  I had to replace the feedline at a television 
station (1600'+ of 3 1/8" rigid line) a few years ago because the 
Steatite insulators had absorbed moisture over the years, increasing 
the loss and resulting in problems with arcing.  

73, 

   ... Joe, W4TV 
 


> -----Original Message-----
> From: amps-bounces@contesting.com 
> [mailto:amps-bounces@contesting.com] On Behalf Of Harold Mandel
> Sent: Wednesday, July 12, 2006 5:28 PM
> To: 'Gary Smith'; 'R L Measures'; g3rzp@g3rzp.wanadoo.co.uk
> Cc: 'Amps Amps'
> Subject: Re: [Amps] Mica cap substitute \ alternative
> 
> 
> Steatite, (porcelain); Corning Glass, PTFE....
> 
> -----Original Message-----
> From: amps-bounces@contesting.com 
> [mailto:amps-bounces@contesting.com] On
> Behalf Of Gary Smith
> Sent: Wednesday, July 12, 2006 5:18 PM
> To: R L Measures; g3rzp@g3rzp.wanadoo.co.uk
> Cc: Amps Amps
> Subject: Re: [Amps] Mica cap substitute \ alternative
> 
> At the risk of straying OT, what is a good insulator at 50 MHz or >?
> 73,
> Gary...wa6fgi
> 
> 
> ----- Original Message ----- 
> From: "R L Measures" <r@somis.org>
> To: <g3rzp@g3rzp.wanadoo.co.uk>
> Cc: "Amps Amps" <amps@contesting.com>
> Sent: Wednesday, July 12, 2006 3:46 AM
> Subject: Re: [Amps] Mica cap substitute \ alternative
> 
> 
> > It's called Dissipation Factor.  For example, Nylon, Delrin 
> and Vinyl  
> > are excellent insulators at 50Hz, but at 50MHz they are not.
> > 
> > On Jul 12, 2006, at 2:13 AM, Peter Chadwick wrote:
> > 
> >> Rich said:
> >>
> >> >Unlike barium-titanate dielectric (ceramic)  doorknob capacitors,
> >> whose current carrying ability increases from 5MHz to 30MHz, mica
> >> dielectric caps' current carrying ability decreases above 5MHz.<
> >>
> >> Yes, but WHY? What's the mechanism that allows mica to be a  
> >> perfectly good insulator in other application, way way up in  
> >> frequency?
> >>
> >> 73
> >>
> >> Peter G3RZP
> >>
> >>
> > 
> > R L MEASURES, AG6K. 805-386-3734
> > r@somis.org
> > 
> > 
> > 
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
> >
> 
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 
> 
> 
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 
> 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>