On Jul 16, 2006, at 4:53 PM, Peter Voelpel wrote:
> Peak envelope power is the average power supplied to the antenna
> transmission line by a transmitter during one radio frequency cycle
> at the
> crest of the modulation envelope, under normal operating conditions.
>
> The crest of the envelope in that example is 400V.
> Since 400V peak equal 282V effective, PEP power is 1600W not 3200W.
Correct. Congrats. Peter.
>
> 73
> Peter
>
>
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-
> bounces@contesting.com] On
> Behalf Of Gudguyham@aol.com
>
>
> Lou -- A question. I measured 400v-pk into 49.9-ohms @ 7MHz with a
> SB-220. How many PEP W is this?
>
>
>
> The way I figure it, that is 3200 watts at that point in time
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
R L MEASURES, AG6K. 805-386-3734
r@somis.org
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|