Amps
[Top] [All Lists]

Re: [Amps] The maximum amount of 811As and 572Bs in parallel

To: "Hsu" <Jbenson@sohu.co>, amps@contesting.com
Subject: Re: [Amps] The maximum amount of 811As and 572Bs in parallel
From: "crawfish" <crawfish@surfmore.net>
Date: Sun, 23 Jul 2006 13:37:13 -0500
List-post: <mailto:amps@contesting.com>
I have an article using 6 of the 811A's in parallel for 160 meters from 73
Magazine, early 1980's. I would imagine the output capacitance of more than
4 would be too much to tune the plate circuit on say, 15 and 10 meters.
                                  Joe W4AAB
----- Original Message -----
From: "Hsu" <Jbenson@sohu.com>
To: <amps@contesting.com>
Sent: Sunday, July 23, 2006 6:05 AM
Subject: [Amps] The maximum amount of 811As and 572Bs in parallel


> Hi,
>    I have seen some schematic diagram of amplifier, I found that the
amount of 811As and 572Bs no more than four, Coud someone can tell me how
much  maximum amount of the tubes in parallel?
>   Thanks!
>         73! Hsu
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>