Thanks for the info on the GE510 diodes. I used them in strings back in the
70's and they worked fine. I am now doing some modifications to a MLA-2500
and plan on using them on the diode board. From the specs, they should be
fine.
Bob W6TR
----- Original Message -----
From: <wc6w@juno.com>
To: <bmaser@tampabay.rr.com>
Sent: Friday, August 25, 2006 1:27 PM
Subject: Re: [Amps] Diode Specs
Hi Bob,
1KV / 2.5A from the 1980 GE Catalog
73 & Good morning,
Marv WC6W
http://wc6w.50webs.com/
-- "Bob Maser" <bmaser@tampabay.rr.com> wrote:
Does anyone have the specs for a GE510 diode? I have a bunch of them
and as
I recall, they are similar to a 1N4006 diode. They are about the same
size.
I want to use them to replace the 1N5062 diode that are in the MLA2500
power
supply board. The 1N5062's are 800V@2A, little tiny round things.
Bob
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
________________________________________________________________________
Try Juno Platinum for Free! Then, only $9.95/month!
Unlimited Internet Access with 1GB of Email Storage.
Visit http://www.juno.com/value to sign up today!
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|