Amps Mailing List (date)

Amps Mailing List (date)

[Thread Index] [Top] [All Lists]

August 31, 2006

[Amps] Need Japan Radio Plate Transformer Info, w2cqm@juno.com, 22:27
[Amps] Looking for manual for Metron/Transworld T500M, john, 20:18
Re: [Amps] Parasitics & Filament Sag, Steve Thompson, 17:54
Re: [Amps] Parasitic supressor SIDE BAR, jeff millar, 16:19
[Amps] metal thin plate cutter(for home build amplifier's cabinetuse) for sale, Hsu, 10:18
[Amps] W6SAI's Radio handbook, Hsu, 03:33
Re: [Amps] Cutting G-10 Board, Peter Chadwick, 03:05
Re: [Amps] *** SPAM *** Re[2]: Parasitics & Filament Sag nowSoldering, Peter Chadwick, 03:00
Re: [Amps] Parasitic supressor SIDE BAR, W7RY, 00:19

August 30, 2006

Re: [Amps] Parasitics & Filament Sag, R L Measures, 22:26
Re: [Amps] Question about TPTG oscillators, R L Measures, 22:26
Re: [Amps] Parasitics & Filament Sag, R L Measures, 22:25
Re: [Amps] TL-922 question, R L Measures, 22:25
Re: [Amps] TL-922 question, R L Measures, 22:25
[Amps] Need a pair of 270mFd/400VDC Power Supply Caps, w2cqm@juno.com, 22:17
Re: [Amps] Parasitics & Filament Sag, Tom W8JI, 19:45
Re: [Amps] TL-922 question, Roy Koeppe, 16:49
Re: [Amps] Parasitics & Filament Sag, Steve Thompson, 16:20
[Amps] WTB, RICHARD GEORGE, 15:19
Re: [Amps] Cutting G-10 Board, Tom W8JI, 15:16
Re: [Amps] Suppressors, Ian White GM3SEK, 15:10
[Amps] Parasitic supressor SIDE BAR, , 13:09
Re: [Amps] Cutting G-10 Board, Will Matney, 13:02
Re: [Amps] Suppressors, Steve Thompson, 12:51
Re: [Amps] Parasitics & Filament Sag now Soldering, Will Matney, 12:42
Re: [Amps] *** SPAM *** Re: Suppressors, Peter Chadwick, 12:17
Re: [Amps] FUN E-BAY DESCRIPTION OF A 3-500Z TUBE, RICHARD GEORGE, 12:11
Re: [Amps] *** SPAM *** Re: Parasitics & Filament Sag, Peter Chadwick, 11:08
Re: [Amps] Question about TPTG oscillators, k7fm, 10:47
Re: [Amps] Question about TPTG oscillators, Peter Chadwick, 10:37
Re: [Amps] TL-922 question, Robert B. Bonner, 10:34
Re: [Amps] FUN E-BAY DESCRIPTION OF A 3-500Z TUBE, Bill Turner, 10:30
Re: [Amps] Question about TPTG oscillators, Bill Turner, 10:28
[Amps] FUN E-BAY DESCRIPTION OF A 3-500Z TUBE, Gudguyham, 10:15
Re: [Amps] Suppressors, Peter Chadwick, 09:52
Re: [Amps] Cutting G-10 Board, m.ford, 09:19
Re: [Amps] Suppressors, Steve Thompson, 09:06
Re: [Amps] Suppressors, Peter Chadwick, 08:57
[Amps] Analogic AN8063 amplifier info, Marko Munih, 08:55
Re: [Amps] Cutting G-10 Board, Ian White GM3SEK, 08:47
Re: [Amps] Suppressors, Tom W8JI, 07:55
Re: [Amps] Parasitics & Filament Sag, Tom W8JI, 07:40
Re: [Amps] Parasitics & Filament Sag, Mike Sawyer, 07:34
[Amps] Suppressors, Steve Thompson, 07:00
Re: [Amps] Cutting G-10 Board, Peter Chadwick, 06:54
Re: [Amps] Parasitics & Filament Sag, Steve Thompson, 06:17
Re: [Amps] Cutting G-10 Board, Steve Thompson, 06:13
Re: [Amps] Parasitics & Filament Sag, Tom W8JI, 05:58
Re: [Amps] Parasitics & Filament Sag, Peter Chadwick, 04:13
Re: [Amps] Question about TPTG oscillators, Peter Chadwick, 04:08
Re: [Amps] Parasitics & Filament Sag, Peter Chadwick, 03:56

August 29, 2006

[Amps] Question about TPTG oscillators, Bill Turner, 22:27
Re: [Amps] Heat spreader for solid-state amps, Tom W8JI, 21:48
Re: [Amps] TL-922 question, Tom W8JI, 21:35
Re: [Amps] Need GU-74B info, gdaught6, 19:32
[Amps] Need GU-74B info, Rob @ Peg Pohorence, 19:03
Re: [Amps] Parasitics & Filament Sag, Bill Turner, 18:55
Re: [Amps] Bizarre SB-230 meter failure, John Pelham, 18:38
Re: [Amps] Cutting G-10 Board, Tony King - W4ZT, 17:21
Re: [Amps] Parasitics & Filament Sag, Colin Lamb, 15:31
Re: [Amps] Cutting G-10 Board, Will Matney, 15:16
Re: [Amps] TL-922 question, Tom W8JI, 15:06
Re: [Amps] Parasitics & Filament Sag, Tom W8JI, 14:52
Re: [Amps] Cutting G-10 Board, Will Matney, 14:31
[Amps] Cutting G-10 Board, Bob Maser, 14:24
Re: [Amps] TL-922 question, Joe Subich, W4TV, 13:45
Re: [Amps] TL-922 question, Joe Subich, W4TV, 13:35
Re: [Amps] TL-922 question, Georgens, Tom, 13:04
Re: [Amps] Parasitics & Filament Sag, Mike Sawyer, 12:27
Re: [Amps] Heat spreader for solid-state amps, Duane B, 12:24
Re: [Amps] Heat spreader for solid-state amps, Robert B. Bonner, 12:23
Re: [Amps] TL-922 question, Robert B. Bonner, 12:08
Re: [Amps] TL-922 question, Peter Chadwick, 12:02
Re: [Amps] TL-922 question, R L Measures, 11:43
Re: [Amps] TL-922 question, R L Measures, 11:43
Re: [Amps] Parasitics & Filament Sag, R L Measures, 11:42
Re: [Amps] Parasitics & Filament Sag, R L Measures, 11:42
Re: [Amps] TL-922 question, R L Measures, 11:42
Re: [Amps] Heat spreader for solid-state amps, Peter Chadwick, 11:09
Re: [Amps] Heat spreader for solid-state amps, Peter Frenning [OZ1PIF], 10:54
[Amps] Heat spreader for solid-state amps, Duane B, 10:17
Re: [Amps] Parasitics & Filament Sag, k7fm, 09:31
Re: [Amps] *** SPAM *** Re: Parasitics & Filament Sag, Peter Chadwick, 07:43
Re: [Amps] TL-922 question, Gudguyham, 06:27
Re: [Amps] Parasitics & Filament Sag, Tom W8JI, 05:41
Re: [Amps] TL-922 question, Gudguyham, 05:31
Re: [Amps] Parasitics & Filament Sag, Peter Chadwick, 04:52
Re: [Amps] Parasitics & Filament Sag, Steve Thompson, 02:41
Re: [Amps] Parasitics & Filament Sag, R L Measures, 02:20
Re: [Amps] Parasitics & Filament Sag, John Vickers, 00:19

August 28, 2006

[Amps] test, Gary Schafer, 23:41
[Amps] TL-922 question, Georgens, Tom, 23:39
Re: [Amps] Parasitics & Filament Sag, R L Measures, 23:15
Re: [Amps] filament forces TSPA, R L Measures, 23:12
Re: [Amps] Bizarre SB-230 meter failure, Martin AA6E, 21:46
[Amps] Bizarre SB-230 meter failure, John Pelham, 19:56
[Amps] FS: Amp parts, Wes Stewart, 18:52
Re: [Amps] Parasitics & Filament Sag, Harold Mandel, 17:51
Re: [Amps] Parasitics & Filament Sag, Robert B. Bonner, 17:03
Re: [Amps] Parasitics & Filament Sag, R L Measures, 16:10
[Amps] Heat Paint, Bob Maser, 15:06
Re: [Amps] Heat Paint, John Vickers, 13:40
Re: [Amps] Heat Paint, David C. Hallam, 13:06
[Amps] Heat Paint, Bob Maser, 12:20
[Amps] Plasma Therm, Robert B. Bonner, 12:12
Re: [Amps] PARASITICS AND fILAMENT SAG, Vic K2VCO, 11:03
Re: [Amps] PARASITICS AND fILAMENT SAG, Keith Dutson, 10:34
Re: [Amps] PARASITICS AND fILAMENT SAG, Bill Turner, 10:26
[Amps] PARASITICS AND fILAMENT SAG, Edwin Karl, 10:12
Re: [Amps] Filament forces, Alek Petkovic, 05:55
Re: [Amps] Parasitics & Filament Sag, Will Matney, 02:09
Re: [Amps] Filament forces, Mike Schatzberg, 00:05

August 27, 2006

[Amps] Filament forces, Tom W8JI, 22:11
[Amps] SELL: Heath Sb200 RF Deck Components, w2cqm@juno.com, 21:03
Re: [Amps] filament forces TSPA, Tom W8JI, 20:22
Re: [Amps] filament forces TSPA, m.ford, 20:04
[Amps] filament forces TSPA, John T. M. Lyles, 17:34
Re: [Amps] Parasitics & Filament Sag, Scott Manthe, 16:09
Re: [Amps] Parasitics & Filament Sag, Tom W8JI, 15:15
Re: [Amps] Parasitics & Filament Sag, Joe Subich, W4TV, 15:15
Re: [Amps] Parasitics & Filament Sag, Tom W8JI, 15:07
Re: [Amps] Parasitics & Filament Sag, Mike Sawyer, 15:07
Re: [Amps] Parasitics & Filament Sag, Will Matney, 15:03
Re: [Amps] Parasitics & Filament Sag, John Vickers, 14:54
Re: [Amps] Parasitics & Filament Sag, Mike Sawyer, 14:51
Re: [Amps] Parasitics & Filament Sag, Tom W8JI, 14:18
Re: [Amps] italian amp SPE EXPERT 1K-FA, Gary Smith, 14:01
Re: [Amps] Parasitics & Filament Sag, k7rdx, 14:01
Re: [Amps] Parasitics & Filament Sag, Ian White GM3SEK, 13:56
Re: [Amps] Parasitics & Filament Sag, Mike Sawyer, 13:49
[Amps] SELL: Heath SB201 Dedicated 6m Amplifier, w2cqm@juno.com, 13:36
[Amps] surplus new Eimac 3-400Z tubes, Fern Rivard, 13:34
[Amps] italian amp SPE EXPERT 1K-FA, LA6FJA/K3RAG Stein Roar Brobakken, 13:16
Re: [Amps] Parasitics & Filament Sag, Bill Turner, 13:09
Re: [Amps] Parasitics & Filament Sag, Bill Turner, 13:06
Re: [Amps] Parasitics & Filament Sag, Joe Subich, W4TV, 13:01
Re: [Amps] Parasitics & Filament Sag, Paul Christensen, 12:57
[Amps] Parasitics & Filament Sag, Harold Mandel, 12:48
Re: [Amps] Parasitics & Filament Sag, Tony King - W4ZT, 12:22
Re: [Amps] Parasitics & Filament Sag, Gary Schafer, 12:16
Re: [Amps] Parasitics & Filament Sag, Will Matney, 12:08
Re: [Amps] Parasitics & Filament Sag, Will Matney, 12:08
Re: [Amps] Parasitics & Filament Sag, Phil Clements, 11:56
Re: [Amps] Parasitics & Filament Sag, Peter Voelpel, 11:54
Re: [Amps] Parasitics & Filament Sag, Joe Subich, W4TV, 10:56
Re: [Amps] Parasitics & Filament Sag, R L Measures, 10:46
Re: [Amps] Parasitics & Filament Sag, R L Measures, 10:46
Re: [Amps] Need Tokyo High Power Amp Information, Joe Subich, W4TV, 09:32
[Amps] Need Tokyo High Power Amp Information, w2cqm@juno.com, 08:09
Re: [Amps] Parasitics & Filament Sag, Ian White GM3SEK, 03:24
Re: [Amps] Parasitics & Filament Sag, Joe Subich, W4TV, 02:42
Re: [Amps] Parasitics & Filament Sag, R L Measures, 01:59
Re: [Amps] pair of NOS 3-400Z available at a bargain price!, Van K7VS, 00:49

August 26, 2006

Re: [Amps] Parasitics & Filament Sag, Mike Sawyer, 22:43
Re: [Amps] Parasitics & Filament Sag, R L Measures, 22:12
Re: [Amps] Parasitics & Filament Sag, Tom W8JI, 20:31
Re: [Amps] Parasitics & Filament Sag, Mike Sawyer, 19:42
Re: [Amps] pair of NOS 3-400Z available at a bargain price!, Alek Petkovic, 19:42
Re: [Amps] pair of NOS 3-400Z available at a bargain price!, Mike Sawyer, 19:30
Re: [Amps] pair of NOS 3-400Z available at a bargain price!, Van K7VS, 19:24
Re: [Amps] pair of NOS 3-400Z available at a bargain price!, Alek Petkovic, 19:09
Re: [Amps] AL-80B Trouble, Tom W8JI, 17:29
Re: [Amps] Parasitics & Filament Sag, Tom W8JI, 17:14
[Amps] Parasitics & Filament Sag, Harold Mandel, 15:00
Re: [Amps] AL-80B Trouble, pegasus, 13:36
[Amps] FT5200 Schematic, K6QD, 11:53
[Amps] pair of NOS 3-400Z available at a bargain price!, Fern Rivard, 10:46
Re: [Amps] AL-80B Trouble, GGLL, 07:45
Re: [Amps] AL-80B Trouble, Rod Elliott, 06:47
Re: [Amps] AL-80B Trouble, Phil Clements, 06:38
Re: [Amps] AL-80B Trouble, Tom W8JI, 03:57
Re: [Amps] AL-80B Trouble, W5CUL, 02:48
[Amps] 3-500Z Troubles, Gary McAdams, 01:28
Re: [Amps] AL-80B Trouble, R L Measures, 01:07
Re: [Amps] AL-80B Trouble, R L Measures, 01:06
Re: [Amps] AL-80B trouble, R L Measures, 01:06
Re: [Amps] AL-80B Trouble, Scott Manthe, 01:06

August 25, 2006

Re: [Amps] AL-80B Trouble, Tom W8JI, 20:17
Re: [Amps] Ameritron QSK-5 Attachment, Ken, KA0W, 18:11
Re: [Amps] EIMAC vs. SED 3CPX800A7, Mike Schatzberg, 17:58
Re: [Amps] EIMAC vs. SED 3CPX800A7, Mike McCarthy, W1NR, 17:37
[Amps] Ameritron QSK-5 Attachment, Bob Wade, 16:23
Re: [Amps] Amps Digest, Vol 44, Issue 84, Edwin Karl, 14:30
Re: [Amps] Diode Specs, Bob Maser, 13:43
[Amps] SELL: Radio Works 50ohm 1:1 Balun 1.5KW, w2cqm@juno.com, 13:02
Re: [Amps] AL-80B Trouble, Scott Manthe, 12:30
Re: [Amps] AL-80B trouble, Roy Koeppe, 12:09
[Amps] AL-80B Trouble, Mike Schlamp, 11:35
[Amps] 1296MHz amp kits available, Rod Adkins, 11:29
[Amps] Sell: Heath Sb201 RF Deck Components, w2cqm@juno.com, 09:40
Re: [Amps] panasonic inverter TSPA, Bill Fuqua, 08:24
Re: [Amps] EIMAC vs. SED 3CPX800A7, W7RY, 00:52
Re: [Amps] Soviet Tube Sockets, ux3lv Vladimir, 00:03
Re: [Amps] panasonic inverter TSPA, R L Measures, 00:02
[Amps] EIMAC vs. SED 3CPX800A7, Craig Anderson Ext 1365, 00:02

August 24, 2006

Re: [Amps] Wind! In series or parallel?, k7fm, 23:46
Re: [Amps] Wind! In series or parallel?, Bill Turner, 23:22
[Amps] Thanks for Help, Jennings, 23:19
[Amps] Wind! In series or parallel?, Martin Sole, 22:28
[Amps] FS: HUGE VARIAC - With price this time, duh!, JimMoci, 14:26
[Amps] FS: HUGE VARIAC, JimMoci, 13:12
[Amps] Diode Specs, Bob Maser, 12:30
Re: [Amps] Shaded pole motor speed, Martin Sole, 09:12
Re: [Amps] Inverter Microwave HV Supply, Tom W8JI, 05:51
Re: [Amps] Inverter Microwave HV Supply, Steve Thompson, 05:20
Re: [Amps] Inverter Microwave HV Supply, Ian White GM3SEK, 04:29
Re: [Amps] Inverter Microwave HV Supply, Steve Thompson, 02:58
Re: [Amps] Inverter Microwave HV Supply, David Smith, 02:11
[Amps] gs35b, tim jenkins, 00:53
Re: [Amps] Inverter Microwave HV Supply, R L Measures, 00:51
Re: [Amps] Inverter Microwave HV Supply, R L Measures, 00:50

August 23, 2006

[Amps] panasonic inverter TSPA, John T. M. Lyles, 19:24
Re: [Amps] Inverter Microwave HV Supply, Will Matney, 19:03
Re: [Amps] Inverter Microwave HV Supply, David Smith, 18:46
[Amps] SELL: Power OEM Heath Supply Filter Capacitors, w2cqm@juno.com, 08:33
Re: [Amps] Inverter Microwave HV Supply, Steve Thompson, 03:07
Re: [Amps] Inverter Microwave HV Supply, John Parkins, 02:30
Re: [Amps] Stolen Radio, pegasus, 01:22
Re: [Amps] Inverter Microwave HV Supply, gdaught6, 00:15
Re: [Amps] Passive Grid Resistor Source?, R L Measures, 00:12

August 22, 2006

Re: [Amps] Shaded pole motor speed, Will Matney, 23:13
[Amps] Shaded pole motor speed, Martin Sole, 22:56
[Amps] Inverter Microwave HV Supply, David Smith, 22:12
Re: [Amps] Stolen Radio, Dino Darling, 21:02
Re: [Amps] Stolen Radio, boss, 19:50
Re: [Amps] Stolen Radio, Will Matney, 19:48
Re: [Amps] Stolen Radio, Administrator, 19:45
Re: [Amps] Stolen Radio, m.ford, 19:39
Re: [Amps] Stolen Radio, Mike Sawyer, 19:06
Re: [Amps] Stolen Radio, KA9OFM John Garrett, 18:56
Re: [Amps] Stolen Radio, Will Matney, 18:54
Re: [Amps] Stolen Radio, , 16:11
Re: [Amps] Stolen Radio, Scott Manthe, 15:47
Re: [Amps] Stolen Radio, Scott Manthe, 15:46
Re: [Amps] Stolen Radio, KA9OFM John Garrett, 15:13
Re: [Amps] Stolen Radio, David C. Hallam, 14:43
Re: [Amps] State of the Amp, David G4FTC, 14:38
[Amps] Stolen Radio, m.ford, 14:34
Re: [Amps] State of the Amp, Bill Turner, 14:05
Re: [Amps] State of the Amp, Bill Turner, 14:03
[Amps] FS: Filament transformer for (2) 833A tubes, JimMoci, 14:00
Re: [Amps] State of the Amp, Tony King - W4ZT, 13:45
Re: [Amps] State of the Amp, Peter Voelpel, 12:49
Re: [Amps] Amps Digest, Vol 44, Issue 75, Edwin Karl, 12:44
Re: [Amps] State of the Amp, Tom W8JI, 12:05
Re: [Amps] State of the Amp, Bill Turner, 12:02
Re: [Amps] AL-1200 Low High Voltage (HV), Bill Turner, 11:45
[Amps] wanted: AEA MM3, TexasRF, 11:43
[Amps] Soviet Tube Sockets, Harold Mandel, 10:49
Re: [Amps] State of the Amp, Peter Voelpel, 10:26
Re: [Amps] State of the Amp, mike kendall, 08:52
Re: [Amps] State of the Amp, mike kendall, 08:52
Re: [Amps] Passive Grid Resistor Source?, David C. Hallam, 08:00
Re: [Amps] AL-1200 Low High Voltage (HV), Gudguyham, 05:46
[Amps] 3CX3000A7 amp for sale, Carsten Esch, 03:10
Re: [Amps] Passive Grid Resistor Source?, Will Matney, 00:41
Re: [Amps] Passive Grid Resistor Source?, gdaught6, 00:34

August 21, 2006

[Amps] Passive Grid Resistor Source?, Jennings, 22:30
Re: [Amps] State of the Amp, Bill Turner, 22:09
[Amps] Source for AWG 16 tinned wire or small quantity of silverplating solution?, Christopher J Galbraith, 20:47
Re: [Amps] State of the Amp, Martin AA6E, 20:33
Re: [Amps] State of the Amp, Ed Swynar, 20:06
[Amps] State of the Amp, Martin AA6E, 19:41
[Amps] Henry 2K-3, StephenTetorka, 15:26
Re: [Amps] AL-1200 Low High Voltage (HV), Bill Turner, 09:16
Re: [Amps] AL-1200 Low High Voltage (HV), Gudguyham, 07:28
Re: [Amps] AL-1200 Low High Voltage (HV), Tom W8JI, 05:16
[Amps] test, Mike Bondarev, 02:28

August 20, 2006

Re: [Amps] AL-1200 Low High Voltage (HV), Will Matney, 23:13
Re: [Amps] AL-1200 Low High Voltage (HV), aa6qn, 18:38
Re: [Amps] AL-1200 Low High Voltage (HV), Tom W8JI, 10:51
Re: [Amps] AL-1200 Low High Voltage (HV), ValErwin, 10:28
Re: [Amps] AL-1200 Low High Voltage (HV), Don Havlicek, 10:25
Re: [Amps] AL-1200 Low High Voltage (HV), bob finger, 10:17
[Amps] AL-1200 Low High Voltage (HV), John, 10:06
Re: [Amps] HV transformers I want to series primary and parallelsecondary, Larry Carman, 08:39
[Amps] Spectrum Analyzers, m.ford, 07:39

August 19, 2006

[Amps] Looking to buy, Will Matney, 23:49
Re: [Amps] HV transformers I want to series primary and parallel, Will Matney, 23:49
[Amps] W6KT, Bob Maser, 21:54
Re: [Amps] HV transformers I want to seriesprimary andparallelsecondary, Martin AA6E, 10:29
Re: [Amps] Network Design Calculator, Bill Turner, 10:00
Re: [Amps] HV transformers I want to series primary and parallel, David Lisney, 09:11
[Amps] Network Design Calculator, Mike(W5UC) & Kathy(K5MWH), 08:04
Re: [Amps] HV transformers I want to seriesprimaryandparallelsecondary, Tom W8JI, 05:20
Re: [Amps] HV transformers I want to series primaryandparallelsecondary, Tom W8JI, 04:26
Re: [Amps] HV transformers I want to series primaryandparallelsecondary, mike kendall, 01:10
Re: [Amps] HV transformers I want to series primary and parallelsecondary, Will Matney, 01:00
Re: [Amps] HV transformers I want to series primary and parallelsecondary, Will Matney, 01:00
Re: [Amps] RE : Anodizing aluminum, painting etc., Will Matney, 00:59

August 18, 2006

Re: [Amps] HV transformers I want to series primaryandparallelsecondary, David C. Hallam, 21:34
Re: [Amps] HV transformers I want to series primary andparallelsecondary, Tom W8JI, 18:51
Re: [Amps] HV transformers I want to series primary and parallelsecondary, mike kendall, 18:13
Re: [Amps] HV transformers I want to series primary and parallelsecondary, Martin AA6E, 17:45
Re: [Amps] HV transformers I want to series primary and parallelsecondary, Larry Carman, 17:22
Re: [Amps] HV transformers I want to series primary andparallelsecondary, Tom W8JI, 17:18
Re: [Amps] HV transformers I want to series primary and parallelsecondary, Steve Thompson, 16:40
Re: [Amps] HV transformers I want to series primary andparallel secondary, Theo Bellamy, 16:37
[Amps] HV transformers I want to series primary and parallelsecondary, Larry Carman, 15:50
Re: [Amps] Anodizing aluminum, painting etc., mike kendall, 10:15
Re: [Amps] Anodizing aluminum, painting etc., Martin AA6E, 08:56
Re: [Amps] Anodizing aluminum, painting etc., Will Matney, 00:46
Re: [Amps] Anodizing aluminum, painting etc., Will Matney, 00:45
Re: [Amps] Anodizing aluminum, painting etc., Will Matney, 00:45

August 17, 2006

[Amps] GL-6942 data, Bill L. Fuqua, 23:11
Re: [Amps] 3CX800A7 Orientation, W7RY, 22:47
Re: [Amps] 3CX800A7 Orientation, Roger Parsons, 22:05
Re: [Amps] Anodizing aluminum, painting etc., Tim Long, 21:19
Re: [Amps] 3CX800A7 Orientation, Winfried Kriegl, 16:30
Re: [Amps] Anodizing aluminum, painting etc., m.ford, 15:31
Re: [Amps] Anodizing aluminum, painting etc., Jim Tonne, 13:16
Re: [Amps] Anodizing aluminum, painting etc., Bill Fuqua, 12:58
Re: [Amps] Anodizing aluminum, painting etc., Gary Schafer, 12:42
Re: [Amps] 3CX800A7 Orientation, Steve Thompson, 11:34
Re: [Amps] Anodizing aluminum, painting etc., Harold Mandel, 11:29
Re: [Amps] Anodizing aluminum, painting etc., k7rdx, 10:33
Re: [Amps] Anodizing aluminum, painting etc., mike kendall, 09:30
Re: [Amps] Anodizing aluminum, painting etc., Steve Thompson, 02:22
Re: [Amps] Anodizing aluminum, painting etc., Tom W8JI, 01:33
Re: [Amps] 3CX800A7 Orientation, R L Measures, 00:15
Re: [Amps] Anodizing aluminum, painting etc., Will Matney, 00:13

August 16, 2006

Re: [Amps] Anodizing aluminum, painting etc., k7fm, 22:28
Re: [Amps] 3CX800A7 Orientation, Larry, 16:31
[Amps] 3CX800A7 Orientation, Bob Maser, 16:24
Re: [Amps] Anodizing aluminum, painting etc., K8MLM, 14:07
[Amps] 3CX800A7 Orientation, Bob Maser, 10:06
Re: [Amps] Anodizing aluminum, painting etc., Peter Chadwick, 04:28
Re: [Amps] Anodizing aluminum, painting etc., S. J. Blackwell, 00:59
Re: [Amps] Anodizing aluminum, painting etc., Will Matney, 00:38

August 15, 2006

[Amps] Pole Pig Questions, Dennis W0JX, 13:09
Re: [Amps] Checking for IMD, Keith Dutson, 12:10
Re: [Amps] Checking for IMD, Mark Hill, 11:55
Re: [Amps] Checking for IMD, Gary Schafer, 11:28
Re: [Amps] Checking for IMD, Gary Schafer, 11:17
Re: [Amps] Anodizing aluminum, painting etc., Bill Turner, 10:46
Re: [Amps] Checking for IMD, Gudguyham, 09:24
Re: [Amps] Checking for IMD, k7fm, 09:19
[Amps] RE : Checking for IMD, hermans, 09:08
Re: [Amps] Checking for IMD, Bill Fuqua, 08:54
Re: [Amps] Checking for IMD, m.ford, 06:45
Re: [Amps] Transformer book, mike kendall, 06:22
Re: [Amps] Anodizing aluminum, painting etc., Peter Chadwick, 02:21
[Amps] Transformer book, Will Matney, 00:16

August 14, 2006

Re: [Amps] Checking for IMD, Michael Tope, 23:17
Re: [Amps] Checking for IMD, Gary Schafer, 22:58
Re: [Amps] Checking for IMD, Michael Tope, 22:41
Re: [Amps] Checking for IMD, Gary Schafer, 21:38
Re: [Amps] Checking for IMD, Tom W8JI, 21:02
Re: [Amps] Checking for IMD, Gary Schafer, 20:37
Re: [Amps] Checking for IMD, Tom W8JI, 19:20
[Amps] SELL:Heath SB1000 Parts, w2cqm@juno.com, 17:48
Re: [Amps] Checking for IMD, Joe Subich, W4TV, 17:00
Re: [Amps] Checking for IMD, Gary Schafer, 16:16
Re: [Amps] Checking for IMD, Gary Schafer, 15:33
Re: [Amps] Checking for IMD, Joe Subich, W4TV, 14:55
Re: [Amps] Checking for IMD, Tom W8JI, 14:49
Re: [Amps] Checking for IMD, Gary Schafer, 14:37
Re: [Amps] Checking for IMD, Tony King - W4ZT, 14:24
Re: [Amps] Checking for IMD, Tom W8JI, 14:10
Re: [Amps] Anodizing aluminum, painting etc., m.ford, 14:07
Re: [Amps] Checking for IMD, Tony King - W4ZT, 14:03
Re: [Amps] Anodizing aluminum, painting etc., Harold Mandel, 13:50
Re: [Amps] Anodizing aluminum, painting etc., Harold Mandel, 13:38
Re: [Amps] Anodizing aluminum, painting etc., Steve Thompson, 13:35
Re: [Amps] Checking for IMD, Gary Schafer, 13:01
Re: [Amps] Anodizing aluminum, painting etc., Tom W8JI, 12:23
Re: [Amps] Checking for IMD, Tom W8JI, 12:11
Re: [Amps] Checking for IMD, Gary Schafer, 11:47
Re: [Amps] Anodizing aluminum, painting etc., Bill Turner, 11:35
Re: [Amps] Checking for IMD, Tom W8JI, 11:34
Re: [Amps] Checking for IMD, Gary Schafer, 11:27
Re: [Amps] Checking for IMD, Tom W8JI, 11:14
Re: [Amps] Checking for IMD, Gary Schafer, 10:56
Re: [Amps] Checking for IMD, Tony King - W4ZT, 09:43
[Amps] FL-2100Z T/R voltage, Tony Wanschura, 07:20
Re: [Amps] Anodizing aluminum, painting etc., PlanerGuy, 01:02

August 13, 2006

Re: [Amps] Checking for IMD, Tom W8JI, 23:17
Re: [Amps] Checking for IMD, Martin AA6E, 23:03
Re: [Amps] Checking for IMD, Gary Schafer, 21:57
Re: [Amps] Checking for IMD, Tom W8JI, 15:03
Re: [Amps] Checking for IMD, Gary Schafer, 14:10
Re: [Amps] QEX article for medium voltage MOSFET linear amplifierlink, Steve Thompson, 11:34
Re: [Amps] Checking for IMD, R L Measures, 08:40
Re: [Amps] Checking for IMD, R L Measures, 08:40
Re: [Amps] Checking for IMD, Tom W8JI, 05:51
Re: [Amps] Checking for IMD, Ian White GM3SEK, 03:48
Re: [Amps] Checking for IMD, Peter Chadwick, 02:55

August 12, 2006

Re: [Amps] Checking for IMD, R L Measures, 23:39
Re: [Amps] Checking for IMD, Tony King - W4ZT, 23:21
[Amps] Chimney for 8930, Byron Tatum, 21:48
Re: [Amps] Checking for IMD, Tom W8JI, 21:09
Re: [Amps] swiatching power supply for oxide cathode filament, Tony King - W4ZT, 19:48
Re: [Amps] Checking for IMD, Tony King - W4ZT, 19:43
Re: [Amps] Checking for IMD, Peter Chadwick, 18:02
Re: [Amps] Fwd: Re: Svetlana, Administrator, 13:34
Re: [Amps] Questions on hot switching 2700V B+ to a 3CX800 amp., Tom W8JI, 12:55
[Amps] Henry 2KD-5 120 Hz Hum (Solution), hamguy2, 12:46
[Amps] Questions on hot switching 2700V B+ to a 3CX800 amp., Mike Krzystyniak K9MK, 12:14
Re: [Amps] Fwd: Re: Svetlana, W7RY, 12:10
[Amps] SELL: EIMAC SK-416 CHIMNEY FOR 3-400Z, Gudguyham, 12:04
[Amps] Fwd: Re: Svetlana, George badger, 11:59
Re: [Amps] Checking for IMD, Michael Tope, 11:27
[Amps] QEX article for medium voltage MOSFET linear amplifier link, mike kendall, 08:40
Re: [Amps] Mechanical question, mike kendall, 08:01
Re: [Amps] Checking for IMD, Peter Chadwick, 07:46
[Amps] swiatching power supply for oxide cathode filament, 徐悦, 07:14
[Amps] Checking for IMD, 徐悦, 07:12
Re: [Amps] Checking for IMD, Tom W8JI, 00:27

August 11, 2006

Re: [Amps] Mechanical question, KA9OFM John Garrett, 23:51
Re: [Amps] Checking for IMD, W7RY, 23:24
Re: [Amps] Svetlana, George badger, 23:16
Re: [Amps] Mechanical question, W7RY, 23:13
Re: [Amps] Checking for IMD, Gary Schafer, 23:04
Re: [Amps] Svetlana, W7RY, 23:03
Re: [Amps] Svetlana 3CX400A7 Tubes Needed, W7RY, 22:58
Re: [Amps] Checking for IMD, Will Matney, 20:50
Re: [Amps] Checking for IMD, Tom W8JI, 20:36
[Amps] Svetlana 3CX400A7 Tubes Needed, Bob Maser, 20:10
Re: [Amps] Checking for IMD, Jim Tonne, 19:41
Re: [Amps] Checking for IMD, Tom W8JI, 19:18
Re: [Amps] Checking for IMD, Tom W8JI, 19:13
Re: [Amps] Checking for IMD, Jim Tonne, 17:49
[Amps] RE : Checking for IMD, hermans, 17:44
Re: [Amps] Checking for IMD, Bill Fuqua, 17:38
Re: [Amps] Checking for IMD, Tom W8JI, 17:08
Re: [Amps] Checking for IMD, Colin Lamb, 17:04
Re: [Amps] Checking for IMD, Jim Tonne, 16:43
Re: [Amps] Checking for IMD, Tom W8JI, 16:32
Re: [Amps] Mechanical question, ToddRoberts2001, 15:52
Re: [Amps] Checking for IMD, Tom W8JI, 15:47
Re: [Amps] Mechanical question, m.ford, 14:50
Re: [Amps] Mechanical question, Dan Hearn, 14:21
Re: [Amps] Checking for IMD, Colin Lamb, 13:43
Re: [Amps] Checking for IMD, Mark Hill, 13:41
Re: [Amps] Checking for IMD, Gary Schafer, 13:40
Re: [Amps] Checking for IMD, Gary Schafer, 13:28
Re: [Amps] Mechanical question, mike kendall, 13:25
[Amps] Mechanical question, mike kendall, 12:34
Re: [Amps] Checking for IMD, Martin AA6E, 12:32
Re: [Amps] Checking for IMD, Martin AA6E, 12:27
Re: [Amps] Checking for IMD, Steve Thompson, 12:22
Re: [Amps] Checking for IMD, Hsu, 12:02
Re: [Amps] Checking for IMD, m.ford, 11:37
Re: [Amps] Checking for IMD, Joe Subich, W4TV, 11:23
Re: [Amps] Checking for IMD, Bill Fuqua, 10:59
Re: [Amps] Checking for IMD, Martin AA6E, 10:43
[Amps] Checking for IMD, Bill Turner, 10:24
Re: [Amps] solid-state amp "suckout", mike kendall, 00:13

August 10, 2006

Re: [Amps] solid-state amp "suckout", Will Matney, 23:09
Re: [Amps] Tuned Input - IMD and efficiency, Will Matney, 23:09
Re: [Amps] Spam from Members of this List ..., Will Matney, 23:08
Re: [Amps] solid-state amp "suckout", Tom W8JI, 19:13
Re: [Amps] solid-state amp "suckout", m.ford, 18:51
Re: [Amps] solid-state amp "suckout", Steve Thompson, 16:35
[Amps] solid-state amp "suckout", Scott Townley, 16:14
Re: [Amps] Tuned Input - IMD and efficiency, Ian White GM3SEK, 14:52
Re: [Amps] Tuned Input - IMD and efficiency, Tony King - W4ZT, 13:40
[Amps] Spam from Members of this List ..., Administrator, 11:04
Re: [Amps] Spam etc..., John Parkins, 09:01
[Amps] Spam etc..., hermans, 08:25
[Amps] Reply Etiquette ..., Administrator, 01:30
Re: [Amps] grid resonance, Joe Subich, W4TV, 01:04
Re: [Amps] Spam from Members of this List ..., Phil Clements, 00:58

August 09, 2006

Re: [Amps] crying abt spam, R L Measures, 23:36
Re: [Amps] Tuned Input - IMD and efficiency, R L Measures, 23:36
Re: [Amps] crying abt spam, R L Measures, 23:36
Re: [Amps] Spam from Members of this List ..., Will Matney, 23:33
[Amps] SELL: Heath Sb1000 Amplifier Retrofitted and Dedicated for6m Opeation, w2cqm@juno.com, 22:05
[Amps] Spam and Meta Discussions about Amps, Administrator, 19:14
Re: [Amps] crying abt spam, Keith Dutson, 19:14
[Amps] Switching power supply for oxide cathode tube 's filament, Hsu, 18:54
Re: [Amps] crying abt spam, Larry Carman, 18:37
Re: [Amps] crying abt spam, m.ford, 18:14
Re: [Amps] Spam from Members of this List ..., mike kendall, 17:57
Re: [Amps] Spam from Members of this List ..., mike kendall, 17:56
Re: [Amps] crying abt spam, RICHARD GEORGE, 17:50
Re: [Amps] crying abt spam, m.ford, 17:35
Re: [Amps] crying abt spam, Tom W8JI, 17:31
Re: [Amps] crying abt spam, Tony King - W4ZT, 17:06
Re: [Amps] crying abt spam, Keith Dutson, 15:50
[Amps] JA1BOP's MOSFET PA for 50MHz, Dick, 15:31
[Amps] crying abt spam, John Vickers, 15:24
Re: [Amps] Spam from Members of this List ..., Larry Carman, 14:57
[Amps] BLF278 (MRF151G) on 50MHz?, Dick, 14:56
Re: [Amps] Fw: grid resonance, Mike(W5UC) & Kathy(K5MWH), 14:17
Re: [Amps] Fw: grid resonance, Bill Turner, 14:03
Re: [Amps] crying abt spam, John Vickers, 13:47
Re: [Amps] Fw: grid resonance, Mike(W5UC) & Kathy(K5MWH), 13:42
Re: [Amps] Spam from Members of this List ..., Bill Turner, 13:42
Re: [Amps] Tuned Input - IMD and efficiency, Tom W8JI, 13:26
Re: [Amps] Fw: grid resonance, Bill Turner, 13:22
Re: [Amps] Tuned Input - IMD and efficiency, Bill Turner, 13:20
Re: [Amps] crying abt spam, Tony King - W4ZT, 13:10
[Amps] crying abt spam, John Vickers, 12:34
Re: [Amps] Spam from Members of this List ..., Mike(W5UC) & Kathy(K5MWH), 12:13
Re: [Amps] Spam from Members of this List ..., Tom W8JI, 12:09
Re: [Amps] Spam from Members of this List ..., Will Matney, 12:01
Re: [Amps] Tuned Input - IMD and efficiency, R L Measures, 12:00
Re: [Amps] grid resonance, R L Measures, 12:00
Re: [Amps] Spam from Members of this List ..., Bob Nielsen, 11:49
Re: [Amps] Spam from Members of this List ..., Mike(W5UC) & Kathy(K5MWH), 11:33
Re: [Amps] Spam from Members of this List ..., Mike(W5UC) & Kathy(K5MWH), 11:18
Re: [Amps] Spam from Members of this List ..., Tony King - W4ZT, 11:09
Re: [Amps] Tuned Input - IMD and efficiency, Tony King - W4ZT, 11:06
Re: [Amps] Spam from Members of this List ..., ad5gb, 11:04
Re: [Amps] Spam from Members of this List ..., Mike(W5UC) & Kathy(K5MWH), 10:48
Re: [Amps] Tuned Input - IMD and efficiency, Tom W8JI, 10:25
Re: [Amps] Spam from Members of this List ..., Steve Thompson, 10:24
Re: [Amps] Spam from Members of this List ..., Phil Clements, 10:11
Re: [Amps] Tuned Input - IMD and efficiency, Phil Clements, 10:01
Re: [Amps] FW: RSOE, Mike(W5UC) & Kathy(K5MWH), 08:42
[Amps] Abt. GS35B, Kim Liljekrans, 07:45
Re: [Amps] Spam from Members of this List ..., GGLL, 07:40
[Amps] FW: RSOE, Harold Mandel, 06:29
Re: [Amps] Spam from Members of this List ..., Ian White GM3SEK, 03:25
Re: [Amps] Tuned Input - IMD and efficiency, George badger, 03:25
Re: [Amps] Tuned Input - IMD and efficiency, Steve Thompson, 03:05
Re: [Amps] Spam from Members of this List ..., Steve Thompson, 02:35
Re: [Amps] Spam from Members of this List ..., mike kendall, 01:49
Re: [Amps] Spam from Members of this List ..., Tony King - W4ZT, 01:48
Re: [Amps] Spam from Members of this List ..., KA9OFM John Garrett, 01:36
Re: [Amps] Tuned Input - IMD and efficiency, Tony King - W4ZT, 01:34
Re: [Amps] Spam from Members of this List ..., mike kendall, 01:29
Re: [Amps] Spam from Members of this List ..., Tony King - W4ZT, 01:16

August 08, 2006

[Amps] Spam from Members of this List ..., Administrator, 23:40
Re: [Amps] Tuned Input - IMD and efficiency, Gary Schafer, 22:45
Re: [Amps] Tuned Input - IMD and efficiency, Tom W8JI, 21:51
[Amps] Impedance meters and test sets, Tom W8JI, 21:49
Re: [Amps] Tuned Input - IMD and efficiency, Phil Clements, 20:33
Re: [Amps] grid resonance, Will Matney, 20:26
Re: [Amps] Anybody using the Acom 1000 or 2000 with aMultiband Vertical Antenna?, R L Measures, 20:22
Re: [Amps] grid resonance, R L Measures, 20:22
Re: [Amps] Tuned Input - IMD and efficiency, k7rdx, 20:07
Re: [Amps] Tuned Input - IMD and efficiency, George badger, 19:21
Re: [Amps] Tuned Input - IMD and efficiency, Phil Clements, 18:46
Re: [Amps] Tuned Input - IMD and efficiency, Tom W8JI, 18:30
Re: [Amps] Tuned Input - IMD and efficiency, Steve Thompson, 17:45
[Amps] solid-state amp filter specs, Scott Townley, 16:50
[Amps] Fw: grid resonance, Mike(W5UC) & Kathy(K5MWH), 14:04
Re: [Amps] grid resonance, Bill Turner, 13:41
Re: [Amps] grid resonance, Tom W8JI, 13:02
Re: [Amps] grid resonance, Bill Turner, 12:49
Re: [Amps] Tuned Input - IMD and efficiency, Tom W8JI, 12:41
Re: [Amps] Estate sale - CB Gear... w2cqm traders net, m.ford, 12:40
Re: [Amps] Tuned Input - IMD and efficiency, Bill Turner, 12:34
Re: [Amps] Estate sale - CB Gear... w2cqm traders net, Bill Turner, 12:28
Re: [Amps] Tuned Input - IMD and efficiency, Larry Carman, 12:15
Re: [Amps] Tuned Input - IMD and efficiency, Colin Lamb, 12:08
Re: [Amps] Tuned Input - IMD and efficiency, Tom W8JI, 11:53
Re: [Amps] Estate sale - CB Gear... w2cqm traders net, Theo Bellamy, 11:39
Re: [Amps] Estate sale - CB Gear... w2cqm traders net, bob finger, 11:24
Re: [Amps] Estate sale - USed CB Gear for re-distribution, Bob Nielsen, 11:19
Re: [Amps] Estate sale - CB Gear... w2cqm traders net, F5HRY, 11:15
Re: [Amps] Estate sale - USed CB Gear for re-distribution, dennis12amplify, 10:16
[Amps] Tuned Input - IMD and efficiency, Tony King - W4ZT, 09:47
Re: [Amps] Estate sale - USed CB Gear for re-distribution, m.ford, 08:47
Re: [Amps] grid resonance, R L Measures, 08:29
Re: [Amps] grid resonance, R L Measures, 08:29
Re: [Amps] Estate sale - USed CB Gear for re-distribution, Ed Swynar, 07:00
Re: [Amps] grid resonance, Tom W8JI, 05:57
Re: [Amps] Henry 2KD-5 120 Hz Hum, Jennings, 05:45
Re: [Amps] grid resonance, Peter Chadwick, 05:08
Re: [Amps] grid resonance, Steve Thompson, 04:23
Re: [Amps] grid resonance, Steve Thompson, 03:30
Re: [Amps] 5V30A PSU, Kim Liljekrans, 03:17
Re: [Amps] GS-35B on 6 meters, Ian White GM3SEK, 01:20
Re: [Amps] Estate sale - USed CB Gear for re-distribution, Will Matney, 00:38
[Amps] HP 8165, Will Matney, 00:38
Re: [Amps] grid resonance, Will Matney, 00:37
Re: [Amps] grid resonance, Will Matney, 00:37
Re: [Amps] grid resonance, Will Matney, 00:37

August 07, 2006

Re: [Amps] Henry 2KD-5 120 Hz Hum, W7RY, 23:21
Re: [Amps] Henry 2KD-5 120 Hz Hum, GGLL, 22:32
Re: [Amps] Estate sale - USed CB Gear for re-distribution, Dave, K2DP, 20:29
Re: [Amps] grid resonance, Tom W8JI, 16:43
Re: [Amps] grid resonance, Jim Brown, 15:05
Re: [Amps] grid resonance, Ian White GM3SEK, 13:28
Re: [Amps] grid resonance, Joe Subich, W4TV, 13:19
Re: [Amps] Ameritron Amps, Dick Knol, 12:27
Re: [Amps] grid resonance, Bill Turner, 12:24
Re: [Amps] grid resonance, Bill Turner, 12:11
Re: [Amps] grid resonance, Ian White GM3SEK, 11:57
Re: [Amps] Anybody using the Acom 1000 or 2000 with aMultiband Vertical Antenna?, Vic K2VCO, 11:47
Re: [Amps] grid resonance, TexasRF, 11:44
Re: [Amps] grid resonance, Phil Clements, 11:33
Re: [Amps] Henry 2KD-5 120 Hz Hum, R L Measures, 10:41
Re: [Amps] Ameritron Amps, R L Measures, 10:41
Re: [Amps] Ameritron Amps, R L Measures, 10:41
Re: [Amps] Henry 2KD-5 120 Hz Hum, R L Measures, 10:41
Re: [Amps] grid resonance, R L Measures, 10:41
[Amps] Anybody using the Acom 1000 or 2000 with a MultibandVertical Antenna?, info eu, 09:55
Re: [Amps] Henry 2KD-5 120 Hz Hum, Leigh S. Jones, KR6X, 09:53
Re: [Amps] grid resonance, k7fm, 09:50
Re: [Amps] grid resonance, Ian White GM3SEK, 08:45
Re: [Amps] grid resonance, Phil Clements, 08:14
Re: [Amps] grid resonance, Peter Chadwick, 05:57
Re: [Amps] Ameritron Amps, Steve Thompson, 05:29
Re: [Amps] grid resonance, Ian White GM3SEK, 05:11
Re: [Amps] grid resonance, Peter Chadwick, 03:55
Re: [Amps] grid resonance, Will Matney, 00:12
Re: [Amps] grid resonance, Will Matney, 00:12

August 06, 2006

[Amps] Non-Inductive Resistors FS, Marv Gonsior, 22:53
Re: [Amps] My Alpha 87A is not changing between bands orsegmentsautomatically!, Dick Green WC1M, 22:18
Re: [Amps] Henry 2KD-5 120 Hz Hum, Leigh S. Jones, KR6X, 20:10
Re: [Amps] Henry 2KD-5 120 Hz Hum, Fern Rivard, 19:35
[Amps] Non-Inductive Resistors FS, Marv Gonsior, 19:04
Re: [Amps] grid resonance, Steve Thompson, 18:33
Re: [Amps] grid resonance, Peter Chadwick, 17:48
Re: [Amps] grid resonance, Peter Chadwick, 17:40
Re: [Amps] grid resonance, Tom W8JI, 17:15
Re: [Amps] Henry 2KD-5 120 Hz Hum, Tom W8JI, 17:10
Re: [Amps] Ameritron Amps, PA3DUV, 16:48
Re: [Amps] grid resonance, Vic K2VCO, 16:35
[Amps] Henry 2KD-5 120 Hz Hum, hamguy2, 16:23
Re: [Amps] Henry 2KD-5 120 Hz Hum, Tom W8JI, 15:51
Re: [Amps] GS-35B on 6 meters, Tony King - W4ZT, 15:41
[Amps] Henry 2KD-5 120 Hz Hum, hamguy2, 14:56
Re: [Amps] grid resonance, Tom W8JI, 14:51
Re: [Amps] Ameritron Amps, Tom W8JI, 14:38
Re: [Amps] grid resonance, Jim Tonne, 14:17
[Amps] Estate sale, Charles Wooten NF4A, 13:11
Re: [Amps] Options, Bill Turner, 13:09
Re: [Amps] grid resonance, R L Measures, 13:09
Re: [Amps] grid resonance, R L Measures, 13:08
Re: [Amps] grid resonance, R L Measures, 13:08
Re: [Amps] grid resonance, R L Measures, 13:08
Re: [Amps] Ameritron Amps, R L Measures, 13:08
Re: [Amps] grid resonance, Bill Turner, 12:57
Re: [Amps] grid resonance, Bill Turner, 12:51
Re: [Amps] GS-35B on 6 meters, Ian White GM3SEK, 12:42
[Amps] SELL: SB1000/SB200 Amplifier Components, w2cqm@juno.com, 12:19
Re: [Amps] GS-35B on 6 meters, Bill Turner, 12:13
Re: [Amps] Ameritron Amps, PA3DUV, 11:58
Re: [Amps] grid resonance, Tom W8JI, 10:59
Re: [Amps] Options, Peter Chadwick, 08:24
[Amps] Resonance, Peter Chadwick, 08:10
[Amps] NOS metai-cermic tube, Hsu, 07:13
Re: [Amps] Options, Alek Petkovic, 05:37
Re: [Amps] Options, Ian White GM3SEK, 05:15
Re: [Amps] Options, David G4FTC, 04:28
Re: [Amps] Options, Steve Thompson, 03:28
Re: [Amps] grid resonance, Peter Chadwick, 02:39
Re: [Amps] grid resonance, Peter Chadwick, 02:37
Re: [Amps] Grid Vs cathode drive, Peter Chadwick, 02:08

August 05, 2006

[Amps] Options, Martin Sole, 22:58
Re: [Amps] band decoders for 1.5kw low pass filters, Peter Voelpel, 18:54
[Amps] Need parts for Drake, Dave Meitzen, 15:21
Re: [Amps] grid resonance, Tom W8JI, 13:52
Re: [Amps] Grid Vs cathode drive, John Vickers, 13:43
Re: [Amps] grid resonance, Tom W8JI, 13:40
Re: [Amps] Grid Vs cathode drive, John Vickers, 13:34
Re: [Amps] Grid Vs cathode drive, Tom W8JI, 13:31
Re: [Amps] Grid Vs cathode drive, John Vickers, 13:18
Re: [Amps] band decoders for 1.5kw low pass filters, PA3DUV, 13:05
Re: [Amps] Grid Vs cathode drive, Bill Coleman, 11:54
Re: [Amps] grid resonance, Vic K2VCO, 11:49
[Amps] band decoders for 1.5kw low pass filters, mike kendall, 11:16
Re: [Amps] grid resonance, Tom W8JI, 10:16
Re: [Amps] grid resonance, k7fm, 10:10
Re: [Amps] GS-35B on 6M, Gudguyham, 09:59
Re: [Amps] *** SPAM *** Re: Grid vs cathode driven, Peter Chadwick, 08:30
Re: [Amps] grid resonance, Peter Chadwick, 08:23
Re: [Amps] grid resonance, Tom W8JI, 08:14
Re: [Amps] grid resonance, Ian White GM3SEK, 06:20
Re: [Amps] Ameritron Amps, Tom W8JI, 06:00
Re: [Amps] grid resonance, Tom W8JI, 05:44
Re: [Amps] Heathkit HA10 linear, Mike(W5UC) & Kathy(K5MWH), 05:17
Re: [Amps] Heathkit HA10 linear, zl1aih, 04:12
Re: [Amps] GS-35B on 6 meters, Ian White GM3SEK, 03:29
Re: [Amps] grid resonance, Ian White GM3SEK, 03:08
Re: [Amps] Ameritron Amps, Steve Thompson, 02:41
Re: [Amps] GS-35B on 6M, Tony King - W4ZT, 02:06
Re: [Amps] GS-35B on 6M, N7KA, 00:58
Re: [Amps] Heathkit HA10 linear, Michael Baker, 00:42
Re: [Amps] grid resonance, Vic K2VCO, 00:40
Re: [Amps] grid resonance, R L Measures, 00:26
Re: [Amps] AL811, AL811H or AL572 mods to 6m, R L Measures, 00:26
Re: [Amps] What exactly is a GDO ?, R L Measures, 00:25
Re: [Amps] Grid Vs cathode drive, R L Measures, 00:25
Re: [Amps] GS-35B on 6 meters, Will Matney, 00:17
Re: [Amps] Grid Vs cathode drive, Will Matney, 00:16

August 04, 2006

Re: [Amps] Heathkit HA10 linear, W7RY, 22:28
Re: [Amps] Heathkit HA10 linear, W7RY, 22:28
[Amps] Heathkit HA10 linear, tom and jeanne Bates, 22:21
Re: [Amps] Grid vs cathode driven, Will Matney, 22:20
Re: [Amps] Grid Vs cathode drive, Tom W8JI, 21:54
Re: [Amps] grid resonance, Tom W8JI, 21:44
[Amps] My Alpha 87A is not changing between bands or segmentsautomatically!, Mohammed NA, 20:05
Re: [Amps] GS-35B on 6 meters, Bill Turner, 19:55
Re: [Amps] GS-35B on 6 meters, Tony King - W4ZT, 19:03
Re: [Amps] Grid vs cathode driven, Hsu, 18:42
Re: [Amps] grid resonance, Bill Turner, 16:08
Re: [Amps] off topic---how do I unsubscribe?, Harold Mandel, 15:35
Re: [Amps] off topic---how do I unsubscribe?, Bill Turner, 15:27
Re: [Amps] Grid Vs cathode drive, Bill Turner, 15:23
Re: [Amps] GS-35B on 6 meters, Gudguyham, 14:26
Re: [Amps] Grid Vs cathode drive, Bill Turner, 13:12
[Amps] GS-35B on 6 meters, Larry, 13:08
Re: [Amps] Grid vs cathode driven, Peter Chadwick, 12:19
[Amps] HERCULES II rack mount, m.ford, 11:31
Re: [Amps] Grid vs cathode driven, Will Matney, 10:33
Re: [Amps] Grid Vs cathode drive, Will Matney, 10:33
Re: [Amps] The HV PS unit and PA without HV transformer., Will Matney, 10:33
Re: [Amps] Grid Vs cathode drive, Peter Chadwick, 07:20
Re: [Amps] Grid Vs cathode drive, Karl-Arne Markström, 07:14
Re: [Amps] Grid Vs cathode drive, Tom W8JI, 05:59
Re: [Amps] grid resonance, Peter Chadwick, 04:23
Re: [Amps] Grid vs cathode driven, Peter Chadwick, 04:14
Re: [Amps] Grid Vs cathode drive, Peter Chadwick, 03:51
Re: [Amps] What exactly is a GDO ?, Steve Thompson, 02:25
Re: [Amps] The HV PS unit and PA without HV transformer., Hsu, 01:44
Re: [Amps] The HV PS unit and PA without HV transformer., Gudguyham, 01:32
[Amps] Four 4CX250 amplifier schematic diagram needed, Hsu, 01:13
Re: [Amps] Grid vs cathode driven, Hsu, 01:03
[Amps] The HV PS unit and PA without HV transformer., Hsu, 01:02
Re: [Amps] Grid Vs cathode drive, R L Measures, 00:16
Re: [Amps] grid resonance, R L Measures, 00:15

August 03, 2006

Re: [Amps] grid resonance, Will Matney, 23:33
Re: [Amps] Clipperton L on 10 m, Will Matney, 23:32
Re: [Amps] Grid Vs cathode drive, Will Matney, 23:32
Re: [Amps] Grid Vs cathode drive, Will Matney, 23:32
Re: [Amps] Grid Vs cathode drive, Will Matney, 23:31
Re: [Amps] What exactly is a GDO ?, Will Matney, 23:31
[Amps] off topic---how do I unsubscribe?, DavidE Benedict, 23:08
Re: [Amps] Clipperton L on 10 m, Yuri Onipko, 22:52
Re: [Amps] Clipperton L on 10 m, Hsu, 21:59
Re: [Amps] Clipperton L on 10 m, Hsu, 21:51
[Amps] Clipperton L on 10 m, Yuri Onipko, 21:16
Re: [Amps] grid resonance, Tom W8JI, 19:29
[Amps] Need AMeritron AL-1200 Info, Rob @ Peg Pohorence, 19:13
Re: [Amps] Grid Vs cathode drive, Steve Katz, 18:03
Re: [Amps] Grid Vs cathode drive, Tom W8JI, 17:57
Re: [Amps] grid resonance, Tom W8JI, 17:31
Re: [Amps] Hercules II power supply, Harold Mandel, 17:10
Re: [Amps] Hercules II power supply, Vic K2VCO, 16:46
Re: [Amps] Hercules II power supply, Harold Mandel, 16:30
Re: [Amps] Hercules II power supply, Vic K2VCO, 16:24
Re: [Amps] Hercules II power supply, Jim Brown, 16:03
Re: [Amps] Hercules II power supply, larryw6lar, 15:56
Re: [Amps] Hercules II power supply, Vic K2VCO, 15:53
Re: [Amps] Hercules II power supply, m.ford, 15:20
[Amps] Hercules II power supply, Vic K2VCO, 14:12
Re: [Amps] Grid Vs cathode drive, John Vickers, 13:49
Re: [Amps] What exactly is a GDO ?, Bill Turner, 12:49
Re: [Amps] Grid Vs cathode drive, Bill Turner, 12:34
Re: [Amps] Grid Vs cathode drive, Peter Chadwick, 12:21
Re: [Amps] G2DAF four 4CX250Bs G2DAF amplifier, Hsu, 10:47
[Amps] OT Drake 2B, Tim O'Rourke, 10:47
Re: [Amps] What exactly is a GDO ?, Frank Goenninger, 10:34
Re: [Amps] What exactly is a GDO ?, Jerry Muller, 10:26
Re: [Amps] What exactly is a GDO ?, Bill Turner, 10:21
[Amps] What exactly is a GDO ?, Frank Goenninger, 10:15
Re: [Amps] grid resonance, Bill Turner, 10:02
Re: [Amps] Grid Vs cathode drive, Peter Chadwick, 09:38
Re: [Amps] G2DAF four 4CX250Bs G2DAF amplifier, Peter Chadwick, 09:36
Re: [Amps] Grid Vs cathode drive, Joe Subich, W4TV, 08:26
[Amps] SELL: Heath SB1000 Amplifier Components, w2cqm@juno.com, 08:08
Re: [Amps] Grid Vs cathode drive, Hsu, 07:52
[Amps] Mishearings, John Nelson, 07:39
Re: [Amps] Grid Vs cathode drive, Tom W8JI, 07:32
Re: [Amps] grid resonance, Tom W8JI, 07:09
Re: [Amps] Limits of a Power transformer, Tom W8JI, 06:13
Re: [Amps] grid resonance, Tom W8JI, 06:06
Re: [Amps] AL811, AL811H or AL572 mods to 6m, Gudguyham, 05:51
Re: [Amps] G2DAF four 4CX250Bs G2DAF amplifier, Hsu, 04:32
Re: [Amps] G2DAF four 4CX250Bs G2DAF amplifier, Hsu, 04:22
Re: [Amps] G2DAF four 4CX250Bs G2DAF amplifier, Peter Chadwick, 03:50
[Amps] G2DAF four 4CX250Bs G2DAF amplifier, Hsu, 03:37
Re: [Amps] grid resonance, Peter Chadwick, 03:35
Re: [Amps] grid resonance, Peter Chadwick, 03:27
Re: [Amps] Grid Vs cathode drive, Peter Chadwick, 03:24
Re: [Amps] AL811, AL811H or AL572 mods to 6m, Peter Chadwick, 03:04
Re: [Amps] grid resonance, Steve Thompson, 02:50
[Amps] Grid Vs cathode drive, Hsu, 02:41
[Amps] EIMAC 4CX1000A FS, Hsu, 02:22
Re: [Amps] grid resonance, Will Matney, 00:01
Re: [Amps] Limits of a Power transformer, Will Matney, 00:00

August 02, 2006

Re: [Amps] grid resonance, Bill Turner, 23:50
Re: [Amps] grid resonance, Chris Howard, 23:04
Re: [Amps] grid resonance, Tom W8JI, 22:13
Re: [Amps] grid resonance, Bill Turner, 21:38
Re: [Amps] grid resonance, Tom W8JI, 21:27
Re: [Amps] AL811, AL811H or AL572 mods to 6m, Hsu, 20:40
Re: [Amps] AL811, AL811H or AL572 mods to 6m, , 20:12
[Amps] grid resonance, carl s., 19:19
Re: [Amps] AL811, AL811H or AL572 mods to 6m, Gudguyham, 18:13
Re: [Amps] AL811, AL811H or AL572 mods to 6m, Tony King - W4ZT, 18:05
Re: [Amps] AL811, AL811H or AL572 mods to 6m, Hsu, 17:23
Re: [Amps] AL811, AL811H or AL572 mods to 6m, Peter Chadwick, 15:49
Re: [Amps] AL811, AL811H or AL572 mods to 6m, Bill Turner, 14:55
Re: [Amps] AL811, AL811H or AL572 mods to 6m, Tom W8JI, 13:31
Re: [Amps] AL811, AL811H or AL572 mods to 6m, Bill Turner, 12:21
Re: [Amps] AL811, AL811H or AL572 mods to 6m, Peter Voelpel, 12:12
Re: [Amps] AL811, AL811H or AL572 mods to 6m, Bill Turner, 12:03
Re: [Amps] AL811, AL811H or AL572 mods to 6m, W7RY, 10:16
Re: [Amps] AL811, AL811H or AL572 mods to 6m, , 10:11
[Amps] SELL: Matched set of (8) SB1000 Filter Capacitors, w2cqm@juno.com, 10:06
Re: [Amps] AL811, AL811H or AL572 mods to 6m, R L Measures, 09:15
Re: [Amps] Ameritron Amps, R L Measures, 09:15
Re: [Amps] Limits of a Power transformer, Tom W8JI, 06:54
Re: [Amps] Ameritron Amps, Steve Thompson, 06:33
Re: [Amps] Limits of a Power transformer, Steve Thompson, 06:05
Re: [Amps] AL811, AL811H or AL572 mods to 6m, Hsu, 05:55
Re: [Amps] Limits of a Power transformer, Ian White GM3SEK, 05:52
Re: [Amps] Amplifier frustrations, Peter Chadwick, 05:44
Re: [Amps] AL811, AL811H or AL572 mods to 6m, Tom W8JI, 05:06
Re: [Amps] Limits of a Power transformer, Tom W8JI, 04:56
Re: [Amps] Low Pass Filter capacitor ratings for 1.5kw level, Tom W8JI, 04:50
[Amps] AL811, AL811H or AL572 mods to 6m, Hsu, 04:31
[Amps] Swap RCA8122 NOS for 4CX250R NOS, Glenn McNeil, 03:36
Re: [Amps] Limits of a Power transformer, Steve Thompson, 02:45

August 01, 2006

Re: [Amps] Low Pass Filter capacitor ratings for 1.5kw level, Will Matney, 23:51
Re: [Amps] Low Pass Filter capacitor ratings for 1.5kw level, Will Matney, 23:51
[Amps] 4pr400A for sale, k7rdx, 23:38
Re: [Amps] Amplifier frustrations, kf4toh, 23:13
Re: [Amps] Amplifier frustrations, W7RY, 22:18
[Amps] Limits of a Power transformer, Nat Gurumoorthy, 21:34
Re: [Amps] Low Pass Filter capacitor ratings for 1.5kw level, Jim Tonne, 20:42
Re: [Amps] Glass melting, f, and D-factor, R L Measures, 19:59
Re: [Amps] Question on an amp., Will Matney, 19:54
Re: [Amps] Low Pass Filter capacitor ratings for 1.5kw level, Will Matney, 19:53
Re: [Amps] Plasma Thermo HFS 3000D, Will Matney, 19:53
[Amps] Message from W2CQM, w2cqm@juno.com, 19:16
Re: [Amps] Low Pass Filter capacitor ratings for 1.5kw level, Steve Thompson, 18:10
Re: [Amps] Amplifier frustrations, Keith Dutson, 17:48
Re: [Amps] Low Pass Filter capacitor ratings for 1.5kw level, Colin Lamb, 17:48
Re: [Amps] Amplifier frustrations, Colin Lamb, 17:42
Re: [Amps] Low Pass Filter capacitor ratings for 1.5kw level, Jim Tonne, 17:07
[Amps] Amplifier frustrations, Peter Chadwick, 16:26
Re: [Amps] sell: sb220 parts...need money, Dino Darling, 16:11
Re: [Amps] Low Pass Filter capacitor ratings for 1.5kw level, Peter Chadwick, 15:41
Re: [Amps] Ameritron Amps, Tom W8JI, 13:41
Re: [Amps] Low Pass Filter capacitor ratings for 1.5kw level, Tom W8JI, 13:32
[Amps] sell: sb220 parts...need money, w2cqm, 13:00
[Amps] sell: Amplifier parts...need money, ron, 12:00
Re: [Amps] Ameritron Amps, Steve Thompson, 11:49
Re: [Amps] blower voltages, m.ford, 11:34
[Amps] Low Pass Filter capacitor ratings for 1.5kw level, mike kendall, 11:27
[Amps] blower voltages, mike kendall, 11:19
Re: [Amps] Ameritron Amps, Steve Thompson, 11:16
Re: [Amps] Ameritron Amps, Gudguyham, 03:12
Re: [Amps] Ameritron Amps, Steve Thompson, 02:19