Rich said
>Below the resonance freq. of the grid, it is difficult to make a g-
g stage oscillate because the grid acts as a shield between the input
and the output<
If the grid resonance is high enough ( for example, a tube with a grid collett,
and a grid 'cage' construction so the inductance is very low) then if the anode
circuit is resonant below the grid resonant frequency, the thing should be
unconditionally stable if Terman is right. That suggests the only parasitic
suppressor needed is a bit of inductance in the plate lead - which you probably
get anyway.
This suggests that it would be easy to get another of these run away stories
that totally changes the content to rubbish........
73
Peter G3RZP
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|