Amps
[Top] [All Lists]

[Amps] solid-state amp "suckout"

To: amps@contesting.com
Subject: [Amps] solid-state amp "suckout"
From: Scott Townley <nx7u@cox.net>
Reply-to: nx7u@arrl.net
Date: Thu, 10 Aug 2006 16:13:59 -0400
List-post: <mailto:amps@contesting.com>
I have a broadband, solid-state amp that seems to have a large-signal 
"suckout".  The small-signal gain across the HF band is as expected, 10.5dB 
decreasing to 9.5dB at 30MHz.  But under full drive, the output at 17m is down 
more than 3dB, and at 15m down about 2dB.  Input VSWR is <1.5:1 for all bands, 
small and large signal.  This is just the amplifier modules; no bandpass 
filtering is in place.
Any ideas or suggestions?  
--
Scott Townley NX7U
Gilbert, AZ  DM43di
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>