Amps
[Top] [All Lists]

Re: [Amps] GS-35B on 6M

To: amps@contesting.com (Amps)
Subject: Re: [Amps] GS-35B on 6M
From: N7KA@comcast.net
Date: Sat, 05 Aug 2006 04:58:28 +0000
List-post: <mailto:amps@contesting.com>
The following was Larry, W7IUV'S question:

What kind of gain can I reasonably expect from a GS-35B on 6 meters at 
anode voltages less then 4 KV? The info I have found on the web is 
sketchy and inconsistant. Most builders seem to avoid the issue of gain. 
I have a number of options for the tube(s) in this amp project and am 
having a hard time deciding which to build.

73, Larry

-- 
Larry - W7IUV
DN07dg
http://w7iuv.com

So far several responses have NOT EVEN addressed the question.

Connection to the GS-35B would be a bit difficult with a fuse clip or snap 
rings.  Take a look at a GS-35B and it is not like an 8877 or 4CX1500.  The 
anode is about 3.5 inches in diameter.

Suggestion to Larry;  Look at the ND2X website and there will be links and 
calls of folks who have the GS-35Bon 6M.  Send them an email and ask about 
their operating conditions.  Results should be actual numbers.

Just wish I was farther along on mine so I could give operating info.  Oh well, 
it will get there.  Until then it would be nice to know what others are getting 
for RF output vs RF input and at what parameters.  Larry, I have NOT done what 
I suggest.

Arne N7KA  
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>