Amps
[Top] [All Lists]

Re: [Amps] GS-35B on 6 meters

To: Ian White GM3SEK <gm3sek@ifwtech.co.uk>
Subject: Re: [Amps] GS-35B on 6 meters
From: Bill Turner <dezrat@copper.net>
Reply-to: dezrat@copper.net
Date: Sun, 06 Aug 2006 09:13:19 -0700
List-post: <mailto:amps@contesting.com>
ORIGINAL MESSAGE:

On Sat, 5 Aug 2006 08:27:35 +0100, Ian wrote:


>People do that... but just because you can remove the anode cooler of a 
>GS35/31 or GI-7, that doesn't make it a good idea.

------------ REPLY SEPARATOR ------------

You misunderstand. 

I ddin't remove the fins at all, only the bolt that holds them in
place. The cooling is not affected by the presence or absence of the
bolt; its only function is to secure the fins. When I put the lug
under the bolt and retightened it, things are just as they were
before. There is almost no heat flow through the bolt itself.

Bill, W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>