>> At 50Hz - 60Hz, nylon works well, quite but at 20MHz it
>> gerts hotter
>> than ____.
> Sure, but that's change in frequency of x400,000, not x4.
> How does nylon
> do at 200Hz?
The only commercial amplifier using those tubes changed to a
nichrome suppressor and continued to have the same problem
with the same tube source. That means either the parasitic
thing was wrong, or the nichrome doesn't do anything
special, or both. Since I have looked at nichrome
suppressors and the Chinese tube, my bet is on both.
73 Tom
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|