Peter,
I totally agree!
Best,
Will
*********** REPLY SEPARATOR ***********
On 8/27/06 at 5:55 PM Peter Voelpel wrote:
>Perhaps the reason is that manufactures of amateur amplifiers are almost
>always hams and just duplicate amplifier layouts from the past.
>Commercial amplifier manufactures used suppressors wound of resistance
>alloy, at least in Germany.
>Siemens and Hagenuk used Constantan (Cu55/Ni45) for that purpose .
>
>73
>Peter
>
>-----Original Message-----
>From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
>Behalf Of Joe Subich, W4TV
>
>That not one manufacturer of amateur amplifiers uses nichrome
>suppressors - even though the marginal cost is insignificant -
>should be a very clear indication that the professionals
>consider your "science" to be without merit and your arguments
>to be completely lacking in integrity.
>
>
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|