Probably you are using the low power filters
73
Peter
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of PA3DUV
Sent: Samstag, 5. August 2006 19:05
To: mike kendall; amps@contesting.com
Subject: Re: [Amps] band decoders for 1.5kw low pass filters
The W3NQN filters from Array can handle 200 watt SSB only, barely enough for
QRP. I use them for my multi TRX Winlink station, they perform very well.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|