Trent:
For Class E go here:
http://tonnesoftware.com/classe.html
Be advised that EER must either use a very wideband
PWM system to minimize loss of sideband suppression
due to time delay mismatch in the two channels, or else
add a time delay to the RF channel. Sounds easy but
it is a difficult path.
For an appnote with lots of graphics illustrating the PWM
system, go here:
http://tonnesoftware.com/appnotes/pwm/pwmham.html
Good luck!
- Jim Tonne WB6BLD
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|