Hi Trent,
Most of the designs you'll encounter on the net are for AM rigs.
If you're looking for a standalone linear you'll likely won't find
one.
There was the SGC Mini-Lini... but, it is appears to be in limbo
due to "connector" issues. :-)
If you carefully consider the required group delay matching between
the RF & AF signal paths it rapidly becomes apparent, for many
reasons, that it is easier to implement an entire transmitter than to
make a standalone EER Class E (or C, or D) linear.
73 & Good afternoon,
Marv WC6W
-- "Trent and Lorraine" <vk4ti@sampson.net.au> wrote:
Greetings
Could anyone on the list point me to designs for EER Class E FET
amps for
amateur radio use ? I am interested in building a desktop KW utilising
common switching devices from the local electronics shop. I would
like to
build a KW desktop FET 1.8~30 Mhz Amp I see references to many
designs but
a lot seem to be propriety design sites that cant be downloaded
Trent
Trent Sampson
[PO Box 1647 Toowoomba Qld 4350] VK4TI
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
________________________________________________________________________
Try Juno Platinum for Free! Then, only $9.95/month!
Unlimited Internet Access with 1GB of Email Storage.
Visit http://www.juno.com/value to sign up today!
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|