| To: | paintedgun@ecewb.com, amps@contesting.com |
|---|---|
| Subject: | Re: [Amps] TT 425 low plate voltage |
| From: | Gudguyham@aol.com |
| Date: | Sun, 31 Dec 2006 17:42:28 EST |
| List-post: | <mailto:amps@contesting.com> |
In a message dated 12/31/2006 5:38:58 P.M. Eastern Standard Time, paintedgun@ecewb.com writes: With no drive it's showing about 1500v Ep in the low position and 2000v Ep in the high position. The book says I should see 1900v Ep in low position and 2700v Ep in high Could be that the HV metering resistors changed value. Common. Lou _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [Amps] TT 425 low plate voltage, Doug Charette |
|---|---|
| Next by Date: | Re: [Amps] TT 425 low plate voltage, Joe Giacobello |
| Previous by Thread: | [Amps] TT 425 low plate voltage, Doug Charette |
| Next by Thread: | Re: [Amps] TT 425 low plate voltage, Joe Giacobello |
| Indexes: | [Date] [Thread] [Top] [All Lists] |