Both of my Titans show low plate voltage, but they output 1500+ watts.
I believe the shunt resistor is known to be a problem. I believe I have
a reference that describes the issue and will look in my files if you
would like.
73, Joe
K2XX
Gudguyham@aol.com wrote:
>
> In a message dated 12/31/2006 5:38:58 P.M. Eastern Standard Time,
> paintedgun@ecewb.com writes:
>
> With no drive it's showing
> about 1500v Ep in the low position and 2000v Ep in the high position. The
> book says I should see 1900v Ep in low position and 2700v Ep in high
>
>
> Could be that the HV metering resistors changed value. Common. Lou
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|