Carl,
I have a pair of Y-739F's
They are Planar triodes with 600 Watts of plate dissipation. Basically
giant 3cx100's or 3c39's They are used in aircraft pulse applications.
I was thinking, they would sure look nice side by side in a 1500Watt output
1296 EME Cavity amp.
I tried to get Marc Thorsen interested in helping me with the cavity, but
he's not lighting up for the project.
BOB DD
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of jeremy-ca
Sent: Friday, May 25, 2007 8:29 AM
To: Steve Thompson; amps@contesting.com
Subject: Re: [Amps] FW: attaching a heat spreader to a heat sink
Ive thought about that with my 1296 and 2304 amps using a pair of water
cooled 3CX100A7's, but since I quit drinkin' about 7 years ago its become
moot.
Carl
KM1H
----- Original Message -----
From: "Steve Thompson" <g8gsq@eltac.co.uk>
To: <amps@contesting.com>
Sent: Friday, May 25, 2007 2:14 AM
Subject: Re: [Amps] FW: attaching a heat spreader to a heat sink
> Robert Bonner wrote:
>> WOW, Water cooling. On a 4 MRF-154 amp you would have the Mister Coffee
>> Attachment.
> Helps keep you going on those long contest sessions. My thoughts were
> moving towards adding a condenser system and turning it into a small
> still.
>
> Steve
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|