Amps
[Top] [All Lists]

Re: [Amps] FW: attaching a heat spreader to a heat sink

To: <amps@contesting.com>
Subject: Re: [Amps] FW: attaching a heat spreader to a heat sink
From: "jeremy-ca" <km1h@jeremy.mv.com>
Date: Sat, 26 May 2007 09:01:18 -0400
List-post: <mailto:amps@contesting.com>
Id love to have something like that to play with Bob. After the Svetlana 
4CX1600A fiasco I dont have many choices to get QRO on 1296.
Never tried EME but with my hilltop location and a negative horizon Im 
probably well situated for those type of shots. Just never had the interest 
I guess; I even have an old 12' TVRO dish out back that I used before 
scrambling..

Carl
KM1H




----- Original Message ----- 
From: "Robert Bonner" <rbonner@qro.com>
To: "'jeremy-ca'" <km1h@jeremy.mv.com>; "'Steve Thompson'" 
<g8gsq@eltac.co.uk>; <amps@contesting.com>
Sent: Friday, May 25, 2007 9:01 PM
Subject: RE: [Amps] FW: attaching a heat spreader to a heat sink


> Carl,
>
> I have a pair of Y-739F's
>
> They are Planar triodes with 600 Watts of plate dissipation.  Basically
> giant 3cx100's or 3c39's They are used in aircraft pulse applications.
>
> I was thinking, they would sure look nice side by side in a 1500Watt 
> output
> 1296 EME Cavity amp.
>
> I tried to get Marc Thorsen interested in helping me with the cavity, but
> he's not lighting up for the project.
>
> BOB DD
>
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
> Behalf Of jeremy-ca
> Sent: Friday, May 25, 2007 8:29 AM
> To: Steve Thompson; amps@contesting.com
> Subject: Re: [Amps] FW: attaching a heat spreader to a heat sink
>
> Ive thought about that with my 1296 and 2304 amps using a pair of water
> cooled 3CX100A7's, but since I quit drinkin' about 7 years ago its become
> moot.
>
> Carl
> KM1H
>
>
> ----- Original Message ----- 
> From: "Steve Thompson" <g8gsq@eltac.co.uk>
> To: <amps@contesting.com>
> Sent: Friday, May 25, 2007 2:14 AM
> Subject: Re: [Amps] FW: attaching a heat spreader to a heat sink
>
>
>> Robert Bonner wrote:
>>> WOW, Water cooling.  On a 4  MRF-154 amp you would have the Mister 
>>> Coffee
>>> Attachment.
>> Helps keep you going on those long contest sessions. My thoughts were
>> moving towards adding a condenser system and turning it into a small
>> still.
>>
>> Steve
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
>
> 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>