Thanks guys.
One more question - what do I do with ALC on TL-922?
Do I need to connect it to 1000mp or it is compatible with TS radios only?
2007/7/7, jeremy-ca <km1h@jeremy.mv.com>:
> I wouldnt run it on 120V at much over 600W unless you have a real stiff ~25A
> feed.
> On 240V you can expect 1200-1300W key down with 80-100W drive.
>
> Ip 800ma; Ig 250ma is typical when properly loaded.
>
> Carl
> KM1H
>
>
>
> ----- Original Message -----
> From: "Alex K2BB" <alex.k2bb@gmail.com>
> To: <amps@contesting.com>
> Sent: Saturday, July 07, 2007 1:18 PM
> Subject: [Amps] TL-922 current/output etc
>
>
> > Hi,
> > I just got a TL-922 as a birthday gift from myself :)
> > I am wondering what is the usual output at 120/240V, how much power it
> > needs
> > from the radio, what plate and grid current i should not exceed?
> > If anyone uses it with 1000-MP and has any advices - that would be really
> > appreciated.
> >
> > Thanks,
> > Alex K2BB/US4LNE
> >
> > _______________________________________________
> > Amps mailing list
> > Amps@contesting.com
> > http://lists.contesting.com/mailman/listinfo/amps
> >
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|