Re: [Amps] wanted suitable blower for 8877 tube

["montytaylor" <montytaylor@texoma.net>]

Carl,

I have one in my hand.  Specification sheet located at:
http://www.ebmpapst.us/allpdfs/G2E085.PDF , and look at the G2E085-AA19-15 
specs. Basically 26.5 CFM, 115VAC, 38 dBA, Ball Bearing Centrifugal Blower, 
Cast Aluminum. Back pressure curves are shown also.

This reason I have in my hand is because I upgraded due to changes in my 
AL-1500 to the G2E120-AR54-43 http://www.ebmpapst.us/allpdfs/G2E120.PDF at 
152 CFM and 63dBA.  Physically larger, and I can switch speeds by switching 
in different capacitors.

Best regards,
Monty/WB5GLB since 1969 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps