Hi Lou, I just missed you on IM this evening. I spent some time on the Drake
L4B. I removed the OEM power rocker switch and sold it on QTH almost
immediately for $65 shipped. I replaced it with a switch I had and completely
rewired the unit with the new 110VAC plug and fuse bringing that voltage into
the rig. Fortunately, the RF deck components are dual voltage so I was able to
make the changeover without too much trouble. Works FB. On power up, all the
components come on in the deck including the fan, neons, and the filament/
accessory voltages. Simultaneously, I send 110VAC down on a interconnecting
power line that activates the remote 115VAC step start power supply controls.
The remote power supply has its own 220VAC plug. After rewiring the bias, it
shouldn't take too long to see if it was worthwhile. Ron
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|