Peter:
As I was reading your note about intermodulation (or
crossmodulation, the term you used) I thought to myself
that a simple highpass filter would be needed. Then I
saw this:
> put high power bandpass filters on all feedlines, but
> that would be a very expensive project.
So I see you have considered that. But it might not
require very much filtering; perhaps 10 to 20 dB of
rejection of the broadcast station would be enough.
While passing your own signals with no particular
attenuation, of course. The filter might be as simple
as a simple highpass Tee or Pi, three elements.
I can help in the "paper" design.
In lieu of "fixing" the amplifier(s) highpass filtering
would be the cure.
- JimT WB6BLD
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|