Re: [Amps] Sheet aluminum

[Commander John <crazytvjohn@yahoo.com>]

One should consider adding glued on wood strip or square to interior walls for 
strengthening as needed depending on thickness of metal used.  It would look 
better from the outside than screw heads or pop rivets. it also costs little, 
and causes no problems.
  john w9zy
   
  vvvvvvvvvvvvvvvvvvvvvvvv w9zy
  

Harold Mandel <hmandel@barantelecom.com> wrote:
  By adding panel details such as 
angle aluminum trim to edges, with
subsequent neat fastener/hardware,
each panel will be strengthened.



             
   
   
  W9ZY
                .... Commander John ....
                         
   






_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps